Identify ("4. Device Setup" ➝ "Identify"); Utility ("5. Utility"); Backup Battery Check ("5. Utility" ➝ "Battery"); Version Indication ("5. Utility" ➝ "Firmware Ver.") - Yamaha ACD1 Reference Manual

■ Identify ("4. Device Setup" ➝ "Identify")
Blinks the "Identify" icon of the corresponding ACD1 in Amp Editor.
Parameter
Identify ON/OFF

Utility ("5. Utility")

Here you can make overall settings for the ACD1 and view various
types of information.
■ Backup battery check ("5. Utility" ➝ "Battery")
Displays the state of the ACD1's internal backup battery.
Parameter
Battery OK
Low Battery
No Battery
• As the battery runs down, the display will successively indicate "Low Battery," "Critical Battery" (only when the power is
turned on), or "No Battery." In this case, immediately save the data to a computer or other external device, and then con-
tact your Yamaha dealer listed at the end of the ACD1 owner's manual to have the backup battery replaced.
CAUTION
■ Version indication ("5. Utility" ➝ "Firmware Ver.")
Displays the ACD1's firmware version.
• You can use Amp Editor to update the ACD1's firmware. For
NOTE
details, refer to the Amp Editor owner's manual.
You can download the latest firmware from the download page of
the following Yamaha website.
http://www.yamahaproaudio.com/
Range
If this is [ON], the "Identify" icon of the corresponding ACD1 in Amp Editor will blink.
Turning this [OFF] will defeat the blinking.
Range
Satisfactory.
The battery is running low.
A battery is not installed, or has malfunctioned. The backup data has been lost.
Identify
Explanation
å 5 .Utility
Battery
Battery
Explanation
Firmware Ver.
V1.10
ACD1 Reference Manual
Panel operations
ON
å
OK
13