Summary of Contents for Yamaha Disklavier ENSPIRE DKC-900
Page 1
DKC-900 Disklavier Control Unit Owner’s manual Mode d’emploi Benutzerhandbuch Manual de instrucciones Manuale di istruzioni...
Page 2
The above statements apply ONLY to those products distrib- users manual, may cause interference harmful to the opera- uted by Yamaha Corporation of America or its subsidiaries. * This applies only to products distributed by Yamaha Corporation of America. (class B) COMPLIANCE INFORMATION STATEMENT (Supplierʼs declaration of conformity procedure)
Page 3
Explanation of Graphical Symbols The lightning flash with arrowhead symbol within an equilateral triangle is intended to C A U T I O N alert the user to the presence of uninsulated RISK OF ELECTRIC SHOCK “dangerous voltage” within the product’s DO NOT OPEN enclosure that may be of sufficient magnitude to constitute a risk of electric...
Page 4
Explication des symboles graphiques L'éclair avec une flèche à l'intérieur d'un ATTENTION triangle équilatéral est destiné à attirer l'attention de l'utilisateur sur la présence RISQUE D'ÉLECTROCUTION NE PAS OUVRIR d'une « tension dangereuse » non isolée à l'intérieur de l'appareil, pouvant être suffisamment élevée pour constituer ATTENTION : POUR RÉDUIRE LES RISQUES D'ÉLECTROCUTION, un risque d'électrocution.
Page 5
Information for users on collection and disposal of old equipment: This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your national legislation.
Page 6
Questi simboli sono validi solamente nell'Unione Europea; se si desidera scartare questi articoli, si prega di contattare le autorità locali o il rivenditore e richiedere informazioni sulla corretta modalità di smaltimento. (weee_eu_it_02) (For European Countries) Importer: Yamaha Music Europe GmbH Siemensstrasse 22-34, 25462 Rellingen, Germany...
Page 7
DKC-900 Disklavier Control Unit Owner’s Manual...
This is a list of built-in songs that can be * When installing this product, it may already be connected. automatically played by this product. You can also download this list from the Yamaha website. Online Manuals (PDF) Disklavier ENSPIRE Controller...
Page 10
For the AC Adaptor WARNING CAUTION • This AC adaptor is designed for use with only Yamaha electronic • When setting up, make sure that the AC outlet is easily accessible. If instruments. Do not use for any other purpose.
Page 11
AC outlet. Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is Connections lost or destroyed.
Page 12
Notes on Source Code Distribution For three years after the factory shipment, you may request from Yamaha the source code for any portions of the product which are licensed under the GNU General Public License by writing to the following address:...
Table of Contents Appendix XG Voice List... A-3 About the Manuals ..........3 Included Accessories ..........3 XG Drum Kit List..A-6 MIDI Data Format ..A-8 Chapter 1 Introduction ....8 Main Features ............8 MIDI IMPLEMENTATION CHART Names of Parts and Their Functions......9 ..
Songs including professional vocal performances by artists in collaboration with Yamaha let you experience the atmosphere of a live performance, and Yamaha also provides a special 24-hour DisklavierRadio streaming service.
Chapter Introduction Names of Parts and Their Functions This product consists of the following units. • Switch Box (following)...... Turn this product on/off to control functions. • Control Center Unit (page 11) ..It is equipped with terminals for connecting external devices. ...
Page 16
Chapter Introduction Switch Box (Rear Panel) 1 [AUTO PLAY] switch 3 [MAINTENANCE] button For activating or deactivating the auto play function. For service personnel only. Do not touch this button. If you leave the switch set to “ON,” playback 4 [USB] terminal automatically starts when the power is turned on.
Page 17
Chapter Introduction Control Center Unit Rear panel Side panel 1 [USB] (To DEVICE) terminal 5 [DIGITAL OUT] jack Used to connect the USB flash drive. Used to connect to the digital input jack of an Note: external audio device using a digital coaxial cable. This product cannot detect the USB flash drive if two or more memory devices are connected at the same time.
This product can handle these four types of file format: unusable. Song File Format Extension Note: Format Yamaha does not assure the operation of the commercially SMF0 MIDI .MID available USB flash drives. Standard MIDI File format 0 for playback and recording.
Chapter Getting Started Connecting the AC Power Cable Connect the AC power cable extending from the piano to the Warning: AC wall outlet. This connection provides power to the Use the AC power cable attached to autoplay piano. the piano. Use of other AC power cables may result in damage, Grand piano Upright piano...
Chapter Getting Started Connect powered speakers (Sold separately for Upright piano) You can connect powered speakers to the [OUTPUT] jacks as illustrated. * The audio cable should be 3m or less in length, and use an audio cable (conversion cable) that matches the shape of the INPUT LINE jack on the speaker side.
Chapter Getting Started Turning the Power On/Off Turning the Power On Make sure that the main switch on the power supply unit/ inlet box is turned on. In the case of Grand piano In the case of Upright piano Power supply unit (located underneath...
Page 22
Chapter Getting Started Setting the Auto Off Function You can turn the power off automatically if you do not use the product for the time specified with the ENSPIRE Controller app. Set the [AUTO OFF MODE] switch on the rear of the switch Note: When set to ON, this product box.
Chapter Getting Started How to use the Silent Piano™ Function (For Pianos Equipped with the Silent Piano™ Function) This product has the original mechanism of a piano that strikes strings with hammers, and also has a “Silent Piano™ function” that effectively mutes the sound.
Internet features is connect this product and smart device. done at the risk of the purchaser. In Here is the summary for connection: no event shall Yamaha, its subsidiaries or Yamaha’s and/or its subsidiaries’ directors, officers, or employees be responsible for Choose the connection method (page 19).
Chapter Getting Started Choosing the Network Connection Method You can use one of the three methods of connections below. Select one which is most suitable for your network environment. Wireless Network Connection by WPS ( page 21) Choose this if you have a wireless router (access point) that supports WPS. Connection will be established via a wireless router (access point).
Page 26
Chapter Getting Started Wired Network Connection ( page 23) Choose this if you have a wireless router (access point) that does not support Note: Use an STP (shielded twisted pair) WPS. Connection will be established via wireless router (access point). cable for connection.
Chapter Getting Started Wireless Network Connection by WPS If your wireless router (access point) supports WPS, you can easily connect Note: To check whether your wireless this product to a network just by following the procedures below, without router (access point) supports WPS, making any additional settings, such as entering a password.
Page 28
Chapter Getting Started Note: Open the Wi-Fi setting screen on your smart device. For details on the Wi-Fi setting, refer to the owner’s manual supplied Enable the Wi-Fi function. with your smart device. From the network list shown on the screen, tap on the network to which you connected this product.
Chapter Getting Started Wired Network Connection If your wireless router (access point) does not support WPS, you can connect this product to a wireless router (access point) using an Ethernet cable. Press the [P] (Standby/On) button to turn the power off. Note: Connect the wireless router (access point) to the [LAN] port To ensure proper security, when...
Chapter Getting Started Direct Wireless Connection You can use this product as an access point to establish a direct wireless Note: If this product is connected directly connection between this product and your smart device. to your smart device, no Internet access is available on your smart device.
Controller operation manual is located on the Information page within the ENSPIRE Controller app. You can also download it from the website below. https://download.yamaha.com/ Connect a smart device to this product After you have connected your smart device to a network, open the ENSPIRE Controller app and select this product from the list.
Other Settings Updating this product Note: Yamaha product firmware may occasionally be updated to improve • To update this product, you will functionality and operability. Certain functions may not be available with older need a USB flash drive with 2GB firmware versions, so we recommend following the instructions below to or more of free space.
Chapter Other Settings Initializing Network Settings If the ENSPIRE Controller app cannot connect to this product due to the improper network settings, follow the procedure below to initialize network settings on this product. Press the [P] (Standby/On) button to turn the power off. While holding down the [- VOLUME +] buttons, press the [P] (Standby/On) button.
Make sure that the AC power cable is securely connected to a suitable AC wall outlet. If this product still cannot be turned on, disconnect it from the AC wall outlet, and consult your Yamaha piano dealer. Switch Box Symptom Remedy The switch box does not appear to work correctly.
Page 35
Chapter Troubleshooting Network Symptom Remedy This product cannot connect to the Internet via a Make sure that the wireless router (access point) is turned wireless router (access point). This product and the wireless router (access point) might be too far apart. Place this product and the wireless router (access point) closer to each other.
Check the settings of your network Twice IP address. devices. The piano control unit does not Consult your Yamaha piano dealer. If work properly. you are using the ENSPIRE Controller app, please tell them the message on the screen. Twice •...
These extra PianoSoft software contains prerecorded songs tracks are played by the internal XG tone generator. made by Yamaha specifically for use with this The accompanying tracks may be used for acoustic product. bass, drums, strings, vibes, etc.
Page 38
Chapter Glossary Abbreviation for Standard MIDI File. Yamaha XG is an extension of the GM (General MIDI) format. Its greater polyphony, more voices, SMF Song Format and use of effects enhances the compatibility between MIDI devices. When a song in the Yamaha...
AC 100V to 240V, 50/60Hz Supplied Accessories Owner’s Manual, Built-in song list, Audio cable, AC adaptor (PA-300C or an equivalent recommended by Yamaha), Power cord, USB wireless LAN adaptor (UD-WL01), Bracket Option Accessories Bracket for CF Series Grand Piano (DKCB-900CF)
XG Voice List Voice Group Voice Name Element Voice Group Voice Name Element Piano GrandPiano Organ Perc.Organ2 GrndPianoKSP RockOrgan MellowGrPno RotaryOrgan PianoStrings SlowRotary Dream FastRotary BrightPiano ChurchOrgan BritePnoKSP ChurchOrgan3 ElecGrandPno ChurchOrgan2 ElecGrPnoKSP NotreDame DetunedCP80 OrganFlute LayeredCP1 Trem.OrganFl LayeredCP2 ReedOrgan Honkytonk PuffOrgan HonkytonkKSP Accordion...
Page 44
XG Voice List Voice Group Voice Name Element Voice Group Voice Name Element Bass TechnoBass Brass SynthBrass3 Orbiter JumpBrass SquareBass AnaVelBrass1 RubberBass AnalogBrass1 Hammer SynthBrass2 SynthBass2 SoftBrass MellowSyBass SynthBrass4 SequenceBass ChoirBrass ClickSynBass AnaVelBrass2 SynBass2Dark AnalogBrass2 SmoothSyBass Reed SopranoSax ModulrSyBass AltoSax DXBass SaxSection XWireBass...
Page 45
XG Voice List Voice Group Voice Name Element Voice Group Voice Name Element Synth. Pad Itopia Ethnic Taisho-kin CCPad Kanoon BowedPad Kalimba Glacier Bagpipe GlassPad Fiddle MetallicPad Shanai TinePad Shanai2 PanPad Pungi HaloPad Hichiriki SweepPad Percussive TinkleBell Shwimmer Bonang Converge Altair PolarPad GamelanGongs...
XG Drum Kit List : Same as Standard Kit 1 : No Sound Bank Select MSB (0-127) Bank Select LSB (0-127) Program Change (0-127) Program Change (1-128) MIDI Alternate Key Off Standard Kit1 Standard Kit2 Room Kit Rock Kit Electro Kit Analog Kit Note # Note...
Page 47
XG Drum Kit List : Same as Standard Kit 1 : No Sound Bank Select MSB (0-127) Bank Select LSB (0-127) Program Change (0-127) Program Change (1-128) MIDI Alternate Key Off Dance Kit Jazz Kit Brush Kit Symphony Kit SFX Kit1 SFX Kit2 Note # Note...
MIDI Data Format MIDI Channel Message (1) [ MIDI (Silent) ] Status byte 1st Data byte 2nd Data byte MIDI Reception MIDI Transmission Piano MIDI Events Song Panel Song MIDI Status Data (HEX) Parameter Data (HEX) Parameter Playback Part Operation Playback Input Channel...
Page 49
MIDI Data Format MIDI Channel Message (2) Parameters Controlled by NRPN (Non-Registered Parameter Numbers) [ MIDI (Silent) ] NRPN Data Entry MIDI Reception MIDI Transmission Piano Parameter Data Range Song Panel Song MIDI Playback Part Operation Playback Input Channel —...
Page 50
MIDI Data Format MIDI Parameter Change Table MIDI Parameter Change Table (XG SYSTEM) [ MIDI (Silent) ] MIDI Reception MIDI Transmission Address Size Data XG Default Piano Parameter Description Song Panel Song MIDI Playback Part Operation Playback Input Channel 00-0F MASTER TUNE -102.4…0…+102.3 [cent]...
Page 51
MIDI Data Format [ MIDI (Silent) ] MIDI Reception MIDI Transmission Address Size Data XG Default Piano Parameter Description Song Panel Song MIDI Playback Part Operation Playback Input Channel 00-7F CHORUS TYPE MSB Refer to Effect Parameter List 41(=CHORUS1) × ×...
Page 52
MIDI Data Format MIDI Parameter Change Table (MULTI EQ) [ MIDI (Silent) ] MIDI Reception MIDI Transmission Address Size Data Piano Parameter Description Song Panel Song MIDI Playback Part Operation Playback Input Channel 00-04 EQ TYPE flat, jazz, pops, rock, classic ×...
Page 53
MIDI Data Format MIDI Parameter Change Table (MULTI PART) [ MIDI (Silent) ] MIDI Reception MIDI Transmission Address Size Data XG Default Piano Parameter Description Song Panel Song MIDI Playback Part Operation Playback Input Channel 00-20 NOT USED × ×...
Page 54
MIDI Data Format [ MIDI (Silent) ] MIDI Reception MIDI Transmission Address Size Data XG Default Piano Parameter Description Song Panel Song MIDI Playback Part Operation Playback Input Channel 28-58 PAT PITCH CONTROL -24…0…+24 [semitones] × × × × 00-7F PAT LOW PASS FILTER CONTROL -9600…0…+9450 [cent] ×...
Page 55
MIDI Data Format MIDI Parameter Change Table (DRUM SETUP) [ MIDI (Silent) ] MIDI Reception MIDI Transmission Address Size Data XG Default Piano Parameter Description Song Panel Song MIDI Playback Part Operation Playback Input Channel 00-7F PITCH COARSE -64…0…+63 ×...
Page 56
… × × 11110000 = Exclusive status Refer to Parameter Change Table 01000011 = YAMAHA ID 0001nnnn = Device Number n=always 0 (when transmit), n=0-F (when recieve) 01001100 = Model ID 0hhhhhhh = Address High 0mmmmmmm mm = Address Mid...
Page 57
Panel Operation Song Playback Channel String Resonance Depth × × × 11110000 = Exclusive status 01000011 = YAMAHA ID 01110011 = Clavinova ID 00000001 = Model ID (Clavinova common ID) 01010000 = SubID 00010001 = SubID 0000nnnn = Channel (00-0F)