Table of Contents
Advertisement
Canon
H.
SAM (Service Access Management) Key for Service Mode Login on
PRISMAsync Servers
The PRISMAsync System Software V8.3 requires a SAM Key to enter service
mode. The SAM Key replaces the service operator password used on previous
versions of the PRISMAsync Print Server.
The use of the SAM Key addresses increased security concerns and
certification requirements for customers that require control of authentication
constraints for all PRISMAsync users.
The SAM Key provides a consistent method to login as a service operator to
multiple products (with supported PRISMAsync Print Server System Software)
using a single SAM Key. Additionally, applications such as ADAM, and
encrypted documentation can be supported by the same SAM Key.
Training is required to attain a SAM Key License. Refer to the Service Training
Solutions section of the
Sam Key order details:
Table 37 – SAM Key Part
CMSTICK /ME WITH FIRMCODE 1002 (no addressable storage)
1
Item Numbers and Part Numbers are subject to change without notice.
IMPORTANT
•
Each authorized service technician must obtain their own SAM Key.
•
The SAM Key license must be certified every 60 days to maintain use of
the SAM key.
Notes:
•
Refer to the
•
Refer to Technical Publication TP20 134 for information about the SAM
Key including Obtaining and Preparing the SAM Key, Service Operator
Access, and SAM Key License Maintenance.
varioPRINT 6000 TITAN Series Service Guide
Revision 1
e-Support Center Website
Description
e-Support Center Website
varioPRINT 6000 TITAN Series Service Guide
for details.
for SAM Key activation instructions.
1
Part Number
1070034828
April 2021
Page 44
Advertisement
Table of Contents
