Canon varioPRINT 600 TITAN Series Service Manual
  1. Manuals
  2. Brands
  3. Canon Manuals
  4. Printer
  5. varioPRINT 600 TITAN Series
  6. Service manual

Canon varioPRINT 600 TITAN Series Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Canon
varioPRINT 6000 TITAN
Series
Service Guide

Advertisement

Table of Contents
loading

Related Manuals for Canon varioPRINT 600 TITAN Series

Summary of Contents for Canon varioPRINT 600 TITAN Series

  • Page 1 Canon varioPRINT 6000 TITAN Series Service Guide...
  • Page 2 Canon U.S.A. e-Support Center Website: http://www.support.cusa.canon.com Canon U.S.A. Partner Portal Web site: https://www.partners.usa.canon.com Distributed in the United States by Canon U.S.A., Inc. IMPORTANT THIS SERVICE GUIDE INCLUDES THE INFORMATION RELATING TO THE VARIOPRINT TITAN 6330/6270/6220/6180, TP TITAN, and MICR TITAN MODELS.
  • Page 3 Pursuant to the authorized Service Agreement with Canon U.S.A., Inc., the Service Provider agrees to indemnify Canon U.S.A., Inc. and to hold it harmless from and against any and all claims arising out of Service Provider’s possession, use, or misuse of this Service Guide.

  • Page 4: Table Of Contents

    Canon varioPRINT 6000 TITAN Series Service Guide Contents Introduction --------------------------------------------------------------------------------------------------- 1 A. Product Overview ------------------------------------------------------------------------------------------------- 1 B. Features -------------------------------------------------------------------------------------------------------------- 2 C. Configuration ------------------------------------------------------------------------------------------------------- 3 D. Speed Upgrade Options ----------------------------------------------------------------------------------------- 9 1. Permanent Speed Upgrade License ---------------------------------------------------------------------- 9 2. Temporary Speed Upgrade License ---------------------------------------------------------------------- 9 E.
  • Page 5 Canon varioPRINT 6000 TITAN Series Service Guide Third Party Accessory Options----------------------------------------------------------------------- 21 A. SDD BLM6300 Booklet Maker -------------------------------------------------------------------------------- 21 B. BLM6200 Booklet Maker --------------------------------------------------------------------------------------- 21 C. BLM550+ Booklet Maker --------------------------------------------------------------------------------------- 22 D. GBC PowerPunch ------------------------------------------------------------------------------------------------ 22 E. Tecnau DocuSheeter System --------------------------------------------------------------------------------- 23 F.
  • Page 6 Appendix ---------------------------------------------------------------------------------------------------- 61 A. Specifications------------------------------------------------------------------------------------------------------ 61 B. varioPRINT 6000 TITAN SERIES - CANON LIMITED WARRANTY -------------------------------- 78 C. varioPRINT 6000 TITAN Series OPC Belt - CANON LIMITED WARRANTY --------------------- 79 D. List of Tables------------------------------------------------------------------------------------------------------- 80 varioPRINT 6000 TITAN Series Service Guide...

  • Page 7: Introduction

    Canon varioPRINT 6000 TITAN Series Service Guide Introduction This section contains the product overview, features, configurations, speed upgrade options, optimum performance range and maximum monthly print/copy volume. Product Overview The varioPRINT 6000 TITAN Series are digital duplex cut-sheet printers powered by the Gemini Instant Duplex technology that simultaneously presses images to both sides of the paper in a single pass, delivering accurate registration and offset-class quality.

  • Page 8: Features

    Canon varioPRINT 6000 TITAN Series Service Guide Features The varioPRINT 6000 TITAN Series features the PRISMAsync Print Server System Software Version 8.4, which includes support for the PRISMAsync Print Server Controller type C53. Additional features available with PRISMAsync Print Server System Software Version 8.3 or later includes:...

  • Page 9: Configuration

    Note: All Configurations shown are for reference purposes only and are subject to change without notice. Please refer to the Dealers Price List on the Partner Portal Website (https://www.partners.usa.canon.com) for the most up-to-date Item Numbers. Table 1 – varioPRINT 6000 TITAN Series Configuration...
  • Page 10 Canon varioPRINT 6000 TITAN Series Service Guide Table 2 – Mandatory Accessories Item Item Number Paper Input Module (Must select one) Paper Input Module Standard-B1 2429C010AA Paper Input Module Flex-A1 (Additional are optional) 2429C013AA High Capacity Stacker (Must select one, additional are optional) High Capacity Stacker 2.1 with Top Cover-B2...
  • Page 11 Canon varioPRINT 6000 TITAN Series Service Guide Table 4 – License Options Item Item Number E-shredding 5401B001AA Integrity Checker–D1 9115B013AA IPDS 5405B001AA ADOBE PDF FOR IPDS-E1 9115B011AA SRA PCL6 9115B009AA DP Link 5407B001AA KDK Link 5408B001AA PPML-D1 9115B014AA Fontset Simplified Chinese...
  • Page 12 Canon varioPRINT 6000 TITAN Series Service Guide Table 7 – DFS30-N Tape Binder Item Item Number DFS30-N (Letter, 120 V AC 60 Hz) 5432B002AA Letter Black Cartridge (Carton) 7629B032AA Item Numbers and Part numbers are subject to change without notice.
  • Page 13 Canon varioPRINT 6000 TITAN Series Service Guide Table 10 – BLM6300 Booklet Maker and Accessories Item Item Number 19, 20, 29 BLM6300 Booklet Maker 7160B029AA BLM6300 Belt Stacker (Long) 7621B138AA BLM6300 Belt Stacker (Short) 7621B335AA Squarefold Module 7621B139AA Booklet Trimmer...
  • Page 14 Canon varioPRINT 6000 TITAN Series Service Guide Table 13 – Tecnau DocuSheeter Feeder and Accessories Item Item Number EC5905-RA DocuSheeter VP6000 System 7603BD55AA Hole Punch 7606B137AA Print Registration 7603B664AA Right Angle Option 7603B703AA Running Perforator 8221B007AA Unwinder 3 inch Chuck...

  • Page 15: Speed Upgrade Options

    Canon varioPRINT 6000 TITAN Series Service Guide Speed Upgrade Options Speed upgrades are available to increase the speed of the varioPRINT 6000 TITAN Series machines without making a significant long-term investment by changing machines or adding machines. Speed upgrade options are available as a full upgrade or a temporary speed upgrade to increase production speed.

  • Page 16: Optimum Performance Range And Monthly Copy/Print Volume

    Canon varioPRINT 6000 TITAN Series Service Guide Optimum Performance Range and Monthly Copy/Print Volume 1. The Optimum Performance Range The optimum performance range is the volume range that the equipment is intended to run on a regular basis to maintain a high-level of performance and print quality.

  • Page 17: Configured Equipment

    Canon varioPRINT 6000 TITAN Series Service Guide Configured Equipment PRISMAsync Print Server Note: Refer to the Appendix to see the specifications for the hardware accessory options. The PRISMAsync Print Server is a high-performance integrated print controller that enables the end-user to define all media settings once and use them throughout the prepress and printing process.

  • Page 18: Resetting System Administrator Password

    Canon varioPRINT 6000 TITAN Series Service Guide 4. Resetting System Administrator Password The system administrator is able to reset his or her password with an email from the PRISMAsync to a recovery email address configured in the Settings Editor. A temporary link is sent to the email address where the System Administrator can enter a new password.

  • Page 19: Stacklogic

    Canon varioPRINT 6000 TITAN Series Service Guide 10. StackLogic Fast tray linking helps boost productivity when multiple High-Capacity Stackers are configured. With Fast Tray linking, print jobs are sent to the first High Capacity Stacker to create stack one (1). When stack one (1) is finished the print job continues uninterrupted to create stack two (2) in the second High Capacity Stacker.

  • Page 20: New Prismasync System Software V8.4 Software Features

    Canon varioPRINT 6000 TITAN Series Service Guide New PRISMAsync System Software V8.4 Software Features The latest PRISMAsync version (system software V8.4) has the following features: WARNING PRISMAsync System Software V8.3 or later requires a licensed SAM Key to enter Service Mode. See...

  • Page 21: Prismasync Print Server Optional Features

    Canon varioPRINT 6000 TITAN Series Service Guide PRISMAsync Print Server Optional Features Optional features available for the PRISMAsync Print Server. 1. Integrity Checker The PRISMAsync Print Server is equipped with McAfee Integrity Check to provides protection against running unauthorized software. Integrity Checker will continuously track and validate if invalid changes to the PRISMAsync software are attempted.

  • Page 22: Operator Panel

    A USB connector is available for direct printing, software installation and software upgrades. Print Guard IV • Shipped as standard equipment with the Canon varioPRINT 6000 TP TITAN Series and varioPRINT 6000 MICR TITAN Series devices. • Not Supported with the varioPRINT 6000 TITAN (Standard) Series devices.

  • Page 23: Hardware Accessory Options

    Canon varioPRINT 6000 TITAN Series Service Guide III. Hardware Accessory Options Branded paper feed, accessories and finishers for the varioPRINT 6000 TITAN Series device. Refer to the Appendix to see the specifications for the hardware accessory options. Paper Input Module...

  • Page 24: Paper Input Module Flex-A1

    Canon varioPRINT 6000 TITAN Series Service Guide 3. Paper Input Module Flex-A1 • Provides an additional paper capacity of approximately 4,500 sheets (20 lb bond (80 g/m • Includes double sheet detection. • Supports paper sizes up to 12.6" x 19.2" in Tray 1 or Tray 2.

  • Page 25: Light Weight Media Kit

    Module, High Capacity Stacker and Tecnau DocuSheeter Feeder (Roll Feeder). All other accessories are not supported. • Canon USA Recommends feeding Light Weight Media from the Roll Feeder or the nearest Paper Input module to the varioPRINT 6000 TITAN Series digital press.

  • Page 26: High Capacity Stacker

    The High Capacity Stacker is a mandatory accessory and at least one stacker must be purchased to use the VP6000 TITAN Series device. Note: when printing light weight media Canon USA recommends a stack height not to exceed 6 inches (150 mm) (approximately 2,000 sheets) to ensure a more consistent stack quality.

  • Page 27: Third Party Accessory Options

    Canon varioPRINT 6000 TITAN Series Service Guide IV. Third Party Accessory Options Accessories and finishing equipment developed by third party manufacturers for the varioPRINT 6000 TITAN Series. Refer to the Appendix to see the specifications for the hardware accessory options.

  • Page 28: Blm550+ Booklet Maker

    250 g/m • Output Capacity: stacks up to 2,500 sheets. Booklet Maker is a non-Canon finishing solution developed by Smart Dedicated Design (SDD) Production B.V. Booklet Maker is a non-Canon finishing solution developed by Plockmatic International, Engineered by Watkiss Automation Ltd.

  • Page 29: Tecnau Docusheeter System

    Reference the BGB3202 Perfect Binder Service Guide for additional details. Note: Training is required to install and support the BGB3202 Perfect Binder. Canon USA Hardware Engineering must be engaged to provide installation. During installation, Canon USA Hardware Engineering will provide training to the service technicians.

  • Page 30: Videk Docuvision Edge

    Canon varioPRINT 6000 TITAN Series Service Guide Videk DocuVision Edge • An in-line camera inspection system for document integrity and print run assurance. • The Videk DocuVision Edge performs a full-page scan providing multiple points of verification on the document, including reading barcodes, MICR lines, and logos, to help ensure the accuracy, accountability, and security of every job.

  • Page 31: Dealer Sales/Service Authorization

    6000 TITAN Series devices in the field. Technicians can be certified on the varioPRINT 6000 TITAN Series by completing the blended curriculum or the online training update course. All training is available is at the Service Training Solutions section of Canon USA’s e-Support Center Website http://www.support.cusa.canon.com Table 18 –...

  • Page 32: Certification

    Canon varioPRINT 6000 TITAN Series Service Guide Certification The successful completion of the varioPRINT 6000 TITAN Series Update online course is required to sell and service the varioPRINT 6000 TITAN Series models. Certification includes the following devices: • VP6330 TITAN/TP TITAN •...
  • Page 33 Canon varioPRINT 6000 TITAN Series Service Guide service technicians must complete the BLM200/6300/300C Professional Booklet Maker training course. Table 20 – BLM6200 and BLM6300 Training Courses Module Name Course Code BLM200/6300/300C Professional Booklet Maker Online Course 191PCBML300O BLM200/6300/300C Professional Booklet Maker Classroom Course 19IPCBLM301C Item Numbers and Part Numbers are subject to change without notice.

  • Page 34: Dfs30-N Tape Binder Elearning Course

    Canon varioPRINT 6000 TITAN Series Service Guide 2. DFS30-N Tape Binder eLearning Course To service the DFS30-N Tape Binder with the varioPRINT 6000 TITAN Series machines, service technicians must complete the Finishing Equipment (DFS-30) Tape Binder online training course. Table 21 – Additional Accessory Training Courses...

  • Page 35: Watkiss P2T 2-Knife Trimmer For Blm550+ Training Course

    Additional technicians can be trained at the customer site provided the customer is informed and is in agreement. The dealership must contact Canon USA Hardware Engineering via the Technical Support Center to arrange installation and training. varioPRINT 6000 TITAN Series Service Guide...

  • Page 36: Training Facilities

    Canon varioPRINT 6000 TITAN Series Service Guide Training Facilities 1. Online Course Training Facilities The online courses are located in the Service Training Solutions section of . Certification maps on the Service Training e-Support Center Website Solutions provide easy access to the training. The online courses can be conducted at any dealer facility that is suitable for online student learning.

  • Page 37: Servicing Notes

    6000 TITAN Series Service Guide VII. Servicing Notes Power and Plug Requirements Canon USA strongly suggests dedicated and properly grounded outlets be provided for the varioPRINT 6000 TITAN Series devices and optional accessories. The varioPRINT 6000 TITAN Series main unit requires a dedicated single...
  • Page 38 Canon varioPRINT 6000 TITAN Series Service Guide 208-240 V/50A NEMA 14-50 receptacle, or a dedicated 3 phase 208-240 V/30A NEMA L15-30 receptacle for proper operation. Power supply requirements for the varioPRINT TITAN Series main unit, finishing devices, and accessories are listed in the table below. Confirm that the required power receptacles are available prior to installation.
  • Page 39 Canon varioPRINT 6000 TITAN Series Service Guide IMPORTANT • If the machine configuration has multiple PIMs or High Capacity Stackers attached, up to three PIMs can use one power strip or quad box that contains separate 115 V AC power outlets for each module (on the left side of the engine).
  • Page 40 Canon varioPRINT 6000 TITAN Series Service Guide Table 28 – Power and Plug Requirements Part or Accessory Power Supply Power Receptacle 3 Phase NEMA L15-30R 208-240 V/30 A outlet Main Unit (Print Engine Module) (Select only ONE outlet configuration) Single Phase...

  • Page 41: Transportation

    Canon varioPRINT 6000 TITAN Series Service Guide Transportation It is recommended to utilize a shipping/trucking company that is experienced at transporting sensitive electronic equipment, i.e. white glove service. An air ride vehicle is preferred whenever possible. Great care must be taken not to tip or bounce the equipment.

  • Page 42: Installation Dimensions And Weight

    Canon varioPRINT 6000 TITAN Series Service Guide Installation Dimensions and Weight Print Engine, finishing equipment, and accessories unboxed Table 30 – Dimensions Unit Width Depth Height Print Engine 56.7” 1,439 mm 42.2” 1,072 mm 48.2” 1,225 mm Paper Input Module-B1 37.2”...
  • Page 43 Canon varioPRINT 6000 TITAN Series Service Guide Table 31 – Weight Unit Weight Print Engine 1,709 lb 775 kg Paper Input Module-A1 476 lb 216 kg Input Interface Module-A1 220 lb 100 kg Media Enhancement Module 298 lb 135 kg High Capacity Stacker 2.1...
  • Page 44 Canon varioPRINT 6000 TITAN Series Service Guide Table 32 – varioPRINT 6000 TITAN Series Dimensions Minimum Configuration: One PIM, Input Interface Module and One High Capacity Stacker with set Finisher Maximum configuration (as shown): Three PIMs, Input Interface Module, One High Capacity Stacker with Finisher, and Two additional High Capacity Stackers Table 33 –...

  • Page 45: Installation Space Requirements

    Canon varioPRINT 6000 TITAN Series Service Guide Installation Space Requirements The varioPRINT 6000 TITAN Series machines approximate installation space requirements may differ, depending on how the machine is configured and the optional accessories attached. Always ensure that there is enough space for service and operation of the device.

  • Page 46: Estimated Installation Times

    Maximum configuration : Main Engine, Three PIMs, Input Interface Module, One High Capacity Stacker with Finisher, and Two additional High Capacity Stackers The estimated installation time includes a Canon USA Engineer training two (2) dealer service technicians. The estimated installation time of the Light Weight Media Kit includes installation and adjustment when the air supply is available at the time of installation.

  • Page 47: Environmental Requirements

    Canon varioPRINT 6000 TITAN Series Service Guide Environmental Requirements When installing the varioPRINT 6000 TITAN Series machines the environmental conditions of the room where the machine is located should be as described in the table below. Table 36 – Optimal Environmental Conditions Optimum Temperature Range Between 62.6°F (17°C) and 82.4°F (28°C)

  • Page 48: Temperature Gradient

    Install this machine at an elevation below 3,280.8’ (1,000 m) (898.7 hPa) for optimal machine performance. 5. Lighting Canon USA recommends installing the machine in a location with at least 500 lux of lighting 29 1/2” (750 mm) above the floor for normal operations and maintenance.

  • Page 49: On Remote Services

    Canon varioPRINT 6000 TITAN Series Service Guide On Remote Services On Remote Services (ORS) is a gateway to remote service with the varioPRINT 6000 TITAN Series devices. ORS provides your dealership with tools and services that allow your dealership to remotely collect service/meter data and maintain the varioPRINT 6000 TITAN Series devices.

  • Page 50: Sam (Service Access Management) Key For Service Mode Login On Prismasync Servers

    Canon varioPRINT 6000 TITAN Series Service Guide SAM (Service Access Management) Key for Service Mode Login on PRISMAsync Servers The PRISMAsync System Software V8.3 requires a SAM Key to enter service mode. The SAM Key replaces the service operator password used on previous versions of the PRISMAsync Print Server.

  • Page 51: Operator Maintenance Programs

    Canon varioPRINT 6000 TITAN Series Service Guide Operator Maintenance Programs The Key Operator Maintenance (KOM) program is an entry level maintenance program that includes cleaning and minor part replacement of the varioPRINT 6000 TITAN Series devices. The KOM program provides customers with the ability to improve the uptime and productivity of their digital press.

  • Page 52: Training

    Canon varioPRINT 6000 TITAN Series Service Guide Print environments where the KOM Program and the eKOM Program would benefit the customer and service organization are: • High volume printing using carbonless media or preprinted media. In these environments, the digital press requires frequent cleaning (KOM/eKOM), replacement of the OPC Belt (eKOM) and replacement of the TTF Belts (eKOM).

  • Page 53: Kom Program Actions

    Replace the OPC Belt  Replace the TTF Belts / LWM TTF Belts   Canon USA recommends replacing the Spiral Cleaners when the machine is cool (at the start of day/shift). If the machine Replace the TTF Spiral Cleaners...

  • Page 54: Key Operator Replaceable Parts

    Canon USA recommends replacing the Spiral Cleaners when the machine is cool (at the start of day/shift). If the machine is warm, the operator or technician must use heat-resistant gloves.

  • Page 55: Spare Parts

    Canon varioPRINT 6000 TITAN Series Service Guide Spare Parts To ensure the machine’s uptimes and quick repairs, it is necessary that each service technician maintains a “car stock” of spare parts, and know the location of QRS (Quick Response Stocks).

  • Page 56: Quick Response Stocks

    Canon varioPRINT 6000 TITAN Series Service Guide Table 43 – Initial Car Stocks Parts List Continued Part Name Quantity Part Number CRANK 1060073541 FUSE, MINIATURE-6A3 S BC100A 1060026907 SWITCH, MICRO-FRM 1XSPDT 1202903 LEVER 1060001717 Part numbers are subject to change without notice.
  • Page 57 Canon varioPRINT 6000 TITAN Series Service Guide Table 44 – Quick Response Stocks Parts List Continued Part Name Quantity Part Number POWER UNIT 1060093010 PULLEY, ASSY PGGT-2MR 54T 1060043028 RECEIVER, XFS 1060028874 ROLLER, ASSY 1060072578 HOUSING, BEARING-26 1060062172 PULLEY-ASSY 2MR-25T...

  • Page 58: Service Working Method Tools

    The tools guide a service technician through a visit, and generates a work list of all required maintenance activities (corrective and preventative). Canon USA strongly recommends using service working method tools as a part of every technician’s diagnostic process when servicing the machine.

  • Page 59: Consumables

    Please consult your authorized Canon Dealer and Canon Production Sales Consultant for sample prints for testing. Table 45 – Main Unit Consumables List...

  • Page 60: Consumable Parts

    68 Canon USA recommends replacing the Spiral Cleaners when the machine is cool (at the start of day/shift). If the machine is warm, the operator or technician must use heat-resistant gloves.

  • Page 61: Counters

    Canon varioPRINT 6000 TITAN Series Service Guide Counters The varioPRINT 6000 TITAN Series machines use counters to track their functional printing use. The operator panel displays up to seven counters, which are also relevant for cost calculations. The table below describes the available counters on the varioPRINT 6000 TITAN Series machines.

  • Page 62: Limited Warranty Support

    The Flat-Rate Program provides a flat-rate credit to Canon USA’s full-line dealers as compensation for warranty expenses that they may incur. • Canon USA Authorized Parts Repair Facilities that repair circuit boards for various Canon products. • The e-Tag, an electronic limited warranty claim form, that is completed...

  • Page 63: Service Parts Availability

    All National Holidays Shipment options are subject to change Only authorized dealer personnel with a unique PIN access code will be allowed to utilize this service. Contact the Canon Parts Order Center (canonparts@cusa.canon.com) for more information. varioPRINT 6000 TITAN Series Service Guide...

  • Page 64: Product Technical Support Offerings

    Specialist for the varioPRINT 6000 TITAN Series is required for an escalation to Field Support Staff. The DES must have worked on the problem directly before a TSC can escalate to Field Support Staff. See the Canon USA Support Escalation Flow Chart in Figure 1 –...
  • Page 65 Canon varioPRINT 6000 TITAN Series Service Guide Figure 1 – Canon USA Support Escalation Flow Chart varioPRINT 6000 TITAN Series End-User End-User Contacts Servicing Dealer (Service technician is dispatched to site) Close Case Servicing Technician Contacts Canon USA TSC Assistance...

  • Page 66: Internet Support

    6000 TITAN Series Service Guide Internet Support Canon USA’s Engineering Services and Solutions provides high-quality support via the Internet, and is only available for Canon USA’s Authorized Servicing Dealers. 1. Canon USA’s e-Support Center Website To access Canon internet support, go to the...

  • Page 67: Appendix

    Canon varioPRINT 6000 TITAN Series Service Guide Appendix Specifications Note: All specifications are for reference purposes only and are subject to change without notice. Table 50 – varioPRINT 6000 TITAN Specifications Specifications Item varioPRINT 6000 TITAN Series 6330 TITAN 6270 TITAN...
  • Page 68 Canon varioPRINT 6000 TITAN Series Service Guide Table 50 – varioPRINT 6000 TITAN Specifications Continued Specifications Item varioPRINT 6000 TITAN Series 6330 TITAN 6270 TITAN 6220 TITAN 6180 TITAN Sleep Mode Recovery Approximately 12 minutes Time Common Criteria EAL 2+, E-shredding, HTTPs, Firewall, PIN for Doc...
  • Page 69 Canon varioPRINT 6000 TITAN Series Service Guide Table 52 – Paper Input Module Standard-B1 / Paper Input Module Optional-B1 Item Specifications 4 trays hold up to 4,600 sheets (LTR) (20 lb bond (80 g/m • 2 large paper Trays up to 1,700 sheets each (LTR) (20 lb bond (80 Paper Capacity •...
  • Page 70 Canon varioPRINT 6000 TITAN Series Service Guide Table 53 – Paper Input Module Flex-A1 Specifications Item Specifications 4 trays hold up to 4,500 sheets (LTR) (20 lb bond (80 g/m • 2 Large paper Trays up to 1,650 sheets each (LTR) (20 lb bond (80 Paper Capacity •...
  • Page 71 Canon varioPRINT 6000 TITAN Series Service Guide Table 54 – PRISMAsync Print Server Specifications Item Specifications Server Type iBase C53 Processor Intel Core i5-8500 Memory 8 GB DDR 2400 MHz 1x 500 GB 2.5 inch Hard Disks 1 x 1 TB 3.5 inch...
  • Page 72 )) – Attach up to three stackers to increase capacity to 18,000 sheets Paper Capacity Note: when printing light weight media Canon USA recommends a stack height not to exceed 6 inches (150 mm) (approximately 2,000 sheets) to ensure a more consistent stack quality.
  • Page 73 Canon varioPRINT 6000 TITAN Series Service Guide Table 57 – Print Guard IV Specifications Item Specifications Type Post fuser Number of Units Two (For the TP and MICR machines only) Required Fuser Path : LTR, LGL, 11” x 17”, and variable sizes (8” x 8.3” to 12” x 19.2”...
  • Page 74 Canon varioPRINT 6000 TITAN Series Service Guide Table 59 – GBC Power Punch Specifications Item Specifications Paper Size LTR, Tab Paper (9” x 11”), 11” x 17” (short-edge only) Paper Weight 16 lb bond to 140 lb Index (60 g/m to 250 g/m •...
  • Page 75 Canon varioPRINT 6000 TITAN Series Service Guide Table 61 – SDD BLM6200 Booklet Maker Specifications Note: The SDD BLM6200 Booklet Maker was formerly named the Océ BLM200 Booklet Maker. Item Specifications • Saddle stapling and folding • Folding only (sheet by sheet) (minimum of 20 lb bond (80 g/m2)) Modes •...
  • Page 76 Canon varioPRINT 6000 TITAN Series Service Guide Table 62 – Plockmatic BLM550+ Booklet Maker Specifications Note: The Plockmatic BLM550+ Booklet Maker was formerly named the Océ BLM550+ Booklet Maker. Item Specifications Description High-volume book stacker for production environments Minimum: 8” x 8” (203 mm x 203 mm)
  • Page 77 Canon varioPRINT 6000 TITAN Series Service Guide Table 63 – Book Stacker (for the BLM550+ Booklet Maker) Specifications Item Specifications Required Equipment BLM550+ Booklet Maker Approximately 36.6” (930 mm) this is approximately Booklets Sheets/pages per booklet Spine Thickness Stacker Capacity...
  • Page 78 Canon varioPRINT 6000 TITAN Series Service Guide Table 65 – BLM6300 Booklet Maker Specifications Item Specifications Description High-volume, continuous booklet maker Required Equipment BLM6300 Belt Stacker (Long) or BLM6300 Belt Stacker (Short) Flat Stitch Minimum: 8” x 9.8” (203 mm x 248 mm) Online Maximum: 12.6”...
  • Page 79 Canon varioPRINT 6000 TITAN Series Service Guide Table 66 – BGB3202 Perfect Binder Specifications Item Specifications Binding Method Hot glue at spine Approximately 0.04" to 2.4" (1 mm to 60 mm) Book Thickness Equivalent to approximately 1,200 pages maximum of (20 lb bond...
  • Page 80 Canon varioPRINT 6000 TITAN Series Service Guide Table 67 – DFS30-N Tape Binder Specifications Item Specifications Binding: LTR on the long edge Paper Sizes Bypass: All sizes processed by the printer Binding: 16 lb bond to 80 lb cover (60 to 216 g/m...
  • Page 81 Canon varioPRINT 6000 TITAN Series Service Guide Table 69 – TECNAU DocuSheeter System Specifications Item Specifications Unwinder, Cutter, and Sheet Transport Unit System Installed by RSI – Roll Systems Web Width: 8.3” to 13.8” (210 mm to 350 mm) Maximum Roll Diameter: 50” (1,270 mm)
  • Page 82 Canon varioPRINT 6000 TITAN Series Service Guide Table 70 – Videk DocuVision Edge Specifications Item Specification • Monochrome Scan Mode • Simplex (either face-up or face-down can be selected at installation • Cross Process Direction: 315 dpi Image Resolution • Process Direction: 315 dpi •...
  • Page 83 Canon varioPRINT 6000 TITAN Series Service Guide Table 71 – USB Flash Drive Specifications (for the USB Key and USB Stick) Capabilities Requirement USB 2.0 High Speed certified, USB 1.1 backward compatible USB connection speed USB 3.0 possible if backward compatible to USB 2.0 and USB 1.1 Size ≥...

  • Page 84: Varioprint 6000 Titan Series - Canon Limited Warranty

    ("Separate Warranty"). Repairs of such Canon or brand peripheral equipment shall be governed by the terms of the Separate Warranty. Non-Canon and non-Oce brand Equipment that may be distributed with the Product are sold "as is" and without warranty of any kind by Canon, including any implied warranty regarding merchantability or fitness for a particular purpose, and all such warranties are disclaimed.

  • Page 85: Varioprint 6000 Titan Series Opc Belt - Canon Limited Warranty

    Following the expiration of the Warranty Period, and continuing for a period of one-year after delivery to the original purchaser of the Belt, or use of it to make a maximum of 2,000,000 prints, whichever comes first, Canon shall provide a credit ("Credit") to the original purchaser toward the purchase of a replacement Belt if the Belt fails to operate under normal use and service by reason of any defect in workmanship and materials, other than exterior defects, such as nicks, scratches, or dents.

  • Page 86: List Of Tables

    Canon varioPRINT 6000 TITAN Series Service Guide List of Tables Table 1 – varioPRINT 6000 TITAN Series Configuration ............3 Table 2 – Mandatory Accessories ..................... 4 Table 3 – Hardware Accessories....................4 Table 4 – License Options ......................5 Table 5 –...
  • Page 87 Canon varioPRINT 6000 TITAN Series Service Guide Table 55 – High Capacity Stacker 2.1 Specifications ............. 66 Table 56 – Set Finisher Specifications ..................66 Table 57 – Print Guard IV Specifications ................67 Table 58 – Media Enhancement Module Specifications ............67 Table 59 –...

Table of Contents