Memorizing Stations; Manual Presetting; Station Call - Pioneer XR-P5500M Operating Instructions Manual

TUNING INTO STATIONS
Beat cut function |
li noise occurs during AM broadcast recording, perform the
tollowing procedures to reduce the noise.
1 Press the POWER switch so that the STANDBY
indicator lights up.
2 Turn on the power while pressing the MONO
button. (The BEAT CUT indicator on the display
lights up.)
@ Tocancel the BEAT CUT function, repeat 1 and 2.
| MEMORIZING STATIONS
Manual presetting Station call
@ Upto 24 FM/AM stations can be memorized at random.
@ For FM reception, the MONO setting can be memorized.
3 24
1 Tune in the desired station.
2 Press MEMORY.
MEMORY
| xo
3 Select the station number to be
memorized by pressing © or @ button.
| Py {HALL} {DISCO] [MOVIE] PAN Swe
| Fd A
| Ke © © a wt
a rt wry
ar an eS a? ST = shah
Operate while the display is flashing (it flashes for
approx, 4 seconds).
iE
4 Press MEMORY.
FESS GWE een,
i
{
Operate while the display is flashing (it flashes for
| approx. 2 seconds).
| The displayed frequency is storedin the selected station
No. Repeat steps 1 through 4 to memorize up to 24
| stations.
ok
O WCBRIO eS ee
1 Press FREQ/STATION to select station
mode.
Station No. appears on the display.
2 Select the desired station number to
recall by pressing © or @ button.
@ When the function is set to TUNER, it is possible to select
the station with the number buttons on the remote control
unit.
NOTES:
e The memorized stations will not be erased even if the
power is turned off. However, if the AC power cord is
unplugged or a power failure occurs, the memorized
stations will be erased. (if the AC power cord is unplugged,
the memorized stations will be preserved for several days.)
e@ /f the memorized stations have been erased, memorize
them again.
15
<ARB7021>
En