Table of Contents
Advertisement
TIMER RECORDING/PLAYBACK
TIMER RECORDING
{Unattended recording from a tuner, etc.)
1.
Insert a blank tape into Deck Hl.
2.
Set the DOLBY NR switch ©.
3.
Press the recording (REC @) button ©.
4.
Prepare the program source.
Set the amplifier input selector to tuner, and tune in the
desired broadcasting station.
5.
Adjust the recording level.
{see page 9)
6.
Press the stop { ME) button @.
7.
Set the audio timer.
Power of all components
will go off.
8.
Set the TIMER mode selector
© to REC.
*
At the preset tine, power will be turned on and record-
ing will start automatically.
@
Timer recording will not work if a cassette without its
erasure prevention tabs is loaded.
TIMER
PLAYBACK
(Wake-up playback)
1.
Insert the recorded tape.
*
Playback will be performed on the deck having a cassette
loaded.
*
{ftapes are loaded in both decks, relay playback will be
carried out.
2.
Set the DOLBY NR switch @).
3.
Set the stereo amplifier for tape playback
Adjust the volume Jevel for wake-up playback.
{Check it by actually playing back the tape.)
4.
Set the audio timer
Power of all components will go off.
5.
Set the TIMER mode selector (0) to PLAY/REPEAT.
*
Atthe preset time, power will be turned on and playback
wiil start automatically.
* Playback will be performed on the deck having a tape
loaded.
*. ff cassettes are loaded in both decks, playback will start
from deck I, and continue on deck Il at the tape end' {re-
fay playback).
* Always set the DOLBY NR switch (@ to the same posi-
tion used for recording.
*®
Operation of audio timers differ depending on the model, so consult the instruction
manual of your unit.
*
When not performing timer operation, always set the TIMER switch @ to the OFF
position, Otherwise, recording or playback might automatically start when turning
power on.
TAPE COPYING
From Deck | to Deck II
1.
Insert the recorded tape into deck {.
2,
Insert a blank tape into deck Hl.
3.
Press the desired SYNCHRO
COPY
button (9.
HIGH SPEED:
To copy the whole tape in a short time
NORMAL
SPEED:
"To copy the tape while listening to the sound
*
If listening to the tape during this operation, set the DOL-
BY NR switch @) accordingly.
To Stop Copying
Press one of the stop (i) buttons.
Both decks
will stop
simultaneously.
*
'This function copies the sound from deck | to deck Hl.
*
You can either copy the whole tape at normal speed while
listening to the sound,
or at double speed to reduce
recording time to one haif.
12
<RRBIO46>
* No recording level adjustment is required when copying
tapes.
*
The deck Il tape will be an identical copy of the deck |
tape, regardiess of the DOLBY NR switch (1) position. For
example,
when
copying a Dolby C encoded
tape, the
deck fl tape is also recorded with Dolby C. During double-
speed copy, all controls become inoperative except for
the stop (@)
button.
During
normal-speed_copy,.the_decktL.record
muting.
{MUTE ©) and PAUSE
(88) buttons also work.
*®
The tape copy mode
is canceled
when the end of one
of the tapes is reached, so it is advisable to use tapes
of the same length.
¢ When copying the same material several times, always
record it from the original tape. Sound quality will deteri-
orate if recorded from a copy.
Note on High-Speed Copy
When performing high-speed copy, an interference beep might be
recorded if there is a TV nearby. in this case, use normal-speed copy
or turn the TV power off.
Advertisement
Table of Contents
