Asynchronous Serial Interface 0 (Uart0); Features - NEC UPD703116 User Manual

10.2 Asynchronous Serial Interface 0 (UART0)

10.2.1 Features

• Transfer rate: 300 bps to 1562.5 Kbps (using a dedicated baud rate generator and an internal system clock of
50 MHz)
• Full-duplex communications
On-chip receive buffer register 0 (RXB0)
On-chip transmit buffer register 0 (TXB0)
• Two-pin configuration
TXD0: Transmit data output pin
RXD0: Receive data input pin
• Reception error detection functions
• Parity error
• Framing error
• Overrun error
• Interrupt sources: 3 types
• Reception error interrupt (INTSER0):
• Reception completion interrupt (INTSR0):
• Transmission completion interrupt (INTST0):
• The character length of transmit/receive data is specified according to the ASIM0 register
• Character length: 7 or 8 bits
• Parity functions: Odd, even, 0, or none
• Transmission stop bits: 1 or 2 bits
• On-chip dedicated baud rate generator
Note The SCK and CTS pins are not available for UART0.
CHAPTER 10 SERIAL INTERFACE FUNCTION
Note
User's Manual U14492EJ5V0UD
Interrupt is generated according to the logical OR of the
three types of reception errors
Interrupt is generated when receive data is transferred from
the receive shift register to receive buffer register 0 after
serial transfer is completed during a reception enabled state
Interrupt is generated when the serial transmission of
transmit data (8 or 7 bits) from the transmit shift register is
completed
411