Panasonic EYADA Series Operating Instructions Manual page 82

SETTING FUNCTIONS OF TOOL (SETTING MODE)
Tool Reset (Initialisation Setting)
Put the tool settings back to the
manufacturer default settings.
To enable this function, set " b4 Tool
Reset Permission Setting" to "_1".
■ Setting Procedure
Switch to setting mode.
Set the forward/reverse lever to
the trigger switch lock position, and
hold down the OK button.
For details, see
Hold down the OK button, ▼
button, and ▲ button at the
same time.
A buzzer sounds long (a long beep),
and "--" appears on the display.
The detection lamp turns off.
OK button
24
EN
P. 43
.
P. 22
Display
▲ button
▼ button
A long
beep
(cont.)