Introduction; Support; Product Description - Husqvarna AUTOMOWER 310E NERA Operator's Manual

2.1 Introduction

Factory PIN code: 1234
Serial number:
Product number:
The serial number and the product number are on the product rating plate and on the product carton.
• Register your product on www.husqvarna.com. Enter the serial number of the product, the product number and
the date of purchase to register your product.

2.2 Support

For support about the product, speak to your Husqvarna
servicing dealer.

2.3 Product description

Note:
Husqvarna regularly updates the appearance
and function of the products. Refer to
6 .
The product is a robotic lawn mower. The product has a
battery power source and operates automatically. When
the battery state of charge is low the product goes to the
charging station to charge. The product starts to operate
again when the battery is fully charged.
The movement pattern of the product is random, which
means that the lawn is cut equally and with less wear.
The product has EdgeCut which makes the product cut
the edges of your lawn. The frequent cutting technique
improves the grass quality and decreases the use of
fertilizers. Collection of grass is not necessary.
2.3.1 Installation method
You can install the product with a boundary wire or
without boundary wire with EPOS
not necessary if you install the product with EPOS
6 - Introduction
2 Introduction
Support on page
™
. A boundary wire is
™
.
For installation of the boundary wire, refer to
with wire on page 12 . For installation with EPOS
read the operator's manual that is included with the
reference station.
®
2.3.2 Automower
®
Automower Connect is a mobile application that makes
it possible to select the operation settings remotely.
®
Automower 310E NERA can connect to the app
®
with Bluetooth and Wi-Fi. Automower
can connect to the app with Bluetooth
cellular connectivity. When you are near the product
you can connect your mobile device and the product
®
with Bluetooth . It is necessary to be connected with
®
Bluetooth to make some settings. When the product
is connected to your Wi-Fi network or to the cellular
network you can control the product from everywhere.
You can also make the settings of the product. Refer to
Installation with wire on page 12 .
®
2.3.3 Automower
®
Automower Access is the user interface of the product,
it includes the display, the jog wheel, the START
button and the STOP button. In Automower
you can set the cutting height and start, stop and
park the product. Refer to
®
Automower Access on page 10 .
®
2.3.4 Automower
(AIM)
®
Automower Intelligent Mapping (AIM) is available in the
®
Automower Connect app. Use Automower
Mapping (AIM) to make a virtual map of your lawn
and installation. For Automower
make virtual work areas and stay-out zones in the map.
®
Automower Intelligent Mapping (AIM) on page
Refer to
24 .
Installation
Connect
®
410XE NERA
®
, Wi-Fi and
Access
®
Access
Menu structure overview in
Intelligent Mapping
®
Intelligent
®
410XE NERA you can
2369 - 001 - 05.02.2024
™
,