Advertisement
4
LAYOUT OF DISPLAY SCREEN
(Mode/Activate) button
Press to confirm command.
Press and hold switch
between the Auto mode and
Manual Mode*.
(Power On/Off) button
Press to turn on the power.
Press and hold for 3 seconds
to turn off the power.
5
MEANING OF LED DISPLAY COLOURS
Blinking white: Miimo switched on and waiting for PIN entry
●
Blinking red: Miimo in error – please resolve the error and press
●
"Mode/Activate" (
) button (see section 7)
Green: Miimo is in Manual mode and will mow now
●
Blue: Miimo is in Auto mode and will mow according to the timer settings
●
in Mii-monitor
Yellow: Miimo will return home or is already at home, but will go out to
Yellow
● ●
mow on the next timer
Orange: Miimo will stay at home indefinitely
●
Green
Blinking
/
Blue
/ Yellow
Yellow
●
"Mode/Activate" (
) button to activate Miimo's mode and stop the
LED from blinking before closing the display screen
Please note that the docking station also has an LED that indicates the status of the
boundary wire. Please consult the owner's manual for the meaning of those
LED colours.
10
Indicator
The mode and error
status are indicated by
LED colours and blinking
patterns. See the table
below for details.
(Home) button
Press to select Home
mode (last one used).
Press and hold to switch
between "Home mode +
restart in the Auto mode
on next timer" and "Home
mode + Stay at Home."
/ Orange: Please press the
6
HOW TO CONTROL MIIMO USING THE DISPLAY
There is a visual guide to using HRM1000 on a sticker inside the display cover.
Please see below for more details.
Blue
Green
To switch between Auto and Manual modes, make a long press on the "Mode/
•
Activate" (
) button to change the colour of the LED between
green
(Manual). Then make a short press on "Mode/Activate"
(
) to activate the mode (the LED will stop blinking) and close the
display cover
To switch between the two Home modes, make a long press on the "Home"
•
(
) button to change the colour of the LED between yellow
restart on the next timer) and
orange
Then make a short press on "Mode/Activate" (
(the LED will stop blinking) and close the display cover
If you do not make a short press on "Mode/Activate" (
•
display cover, Miimo will tell you that it is not ready to carry out your command
by making three beeps
Note: If you select manual mode, Miimo will mow for 10 cycles then resume
auto timer, unless you intervene. Other manual mode options are available in
the Mii-monitor app.
Yellow
Orange
(Auto) and
blue
yellow
(Home and then
(Stay at home).
) to activate the mode
) before closing the
11
Advertisement
