Advertisement
INTRODUCTION
Thank you for buying the Honda Miimo HRM1000. This product has a different
user interface compared to the other models in our Miimo range. The owner's
manual accompanying the product gives you all the information you need to
understand how Miimo works in your garden. But this supplementary guide will
help you better understand how to use the simplified display screen on HRM1000.
The main functions of the display screen are:
-
Switch Miimo ON/OFF, and enter the PIN
-
Start Miimo
-
Switch Miimo to Auto mode
-
Send Miimo back home
-
Clear Miimo error after resolving it
-
Stop the theft alarm
For all other functions and settings, please connect Miimo to the Mii-monitor smartphone
application by Bluetooth.
CONTENTS
Installation (by yourself or by your dealer) ................................................................... 5
1.
Set up your Mii-monitor account ................................................................................ 5
2.
Set up Miimo (by yourself or by your dealer) ............................................................... 9
3.
Layout of display screen ........................................................................................... 10
4.
Meaning of LED display colours ................................................................................. 10
5.
How to control Miimo using the display screen ......................................................... 11
6.
How to resolve common errors ................................................................................ 12
7.
Switch on Miimo and enter PIN ................................................................................ 13
8.
Stop the theft alarm ................................................................................................. 15
9.
4
1
INSTALLATION
Most Miimos are physically installed and set up by our network of trained, authorised
Honda dealers. However, in case you would like to install Miimo yourself, please
follow the instructions in the Owner's Manual to install Miimo's docking station and
boundary wire. To switch ON Miimo, put Miimo in the docking station with the power
supply connected. Open the display screen by pressing the "Stop" button. Because
you have not yet created a PIN code for Miimo, the LED will be blinking red. To set
up the PIN code, you will need to set up an account in Mii-monitor.
2
SET UP YOUR MII-MONITOR ACCOUNT
Mii-monitor is available for both Android and Apple smartphone
devices and tablets.
5
Advertisement
