Panasonic ES3831 / ES3832 / ES3833 - Cordless Shaver Manual

Important

Before use

This WET/DRY shaver can be used for wet shaving with shaving lather or for dry shaving. You can use this watertight shaver in the shower and clean it in water.

Using the device

The outer foil is very thin and can be damaged if not used correctly. Check that the foil is not damaged before using the shaver. Do not use the shaver if the foil etc. is damaged as you will cut your skin.

Cleaning the device

If you clean the shaver with water, do not use salt water or hot water. Do not soak the shaver in water for a long period of time. Wipe it with a cloth dampened with soapy water. Do not use thinner, benzine or alcohol.

Storing the product

Do not leave this shaver within the reach of small children. Keep these operating instructions in a safe place.

SPECIFICATIONS

Model: ES3831/ES3832/ES3833
Batteries: Two AA dry-cell batteries (DC 3.0 V) (Sold separately)
This product is intended for household use only.

Parts identification

1. Protective cap
2. Outer foil
3. Foil frame
4. Inner blade
5. Foil frame release button
6. 0/1 switch
7. Switch lock button
8. Battery cover
9. Battery cover release dial
10. Trimmer (ES3833 only)
11. Case (ES3832/ES3833 only)
12. Cleaning brush

Using the device

1. Depress the switch lock button and slide the 0/1 switch upwards.
   
2. Hold the shaver as illustrated below and shave.
   

• Start out shaving by applying gentle pressure to your face. Stretch your skin with your free hand and move the shaver back and forth in the direction of your beard. You may gently increase the amount of pressure as your skin becomes accustomed to this shaver. Applying excessive pressure does not provide a closer shave.

Using the trimmer (ES3833 only)
Slide the 0/1 switch upwards. Align the " " mark and the " – " mark on the body with each other. Place at a right angle to your skin and move downwards to trim your sideburns.

Cleaning

1. Remove the protective cap.
2. Apply some hand soap to the outer foil.
3. Turn the shaver on and then pour some water over the outer foil. (Fig. 1)
   
4. Turn the shaver off after 10-20 seconds.
5. Remove the foil frame while pressing the foil frame release button and clean it with running water. (Fig. 2)
   
6. Wipe off any drops of water with a dry cloth.
7. Dry the foil frame and the shaver completely. (Fig. 3)
   

Replacing the outer foil and the inner blade

Replacing the outer foil

1. Press the foil frame release button and lift the foil frame upwards as illustrated. (Fig. 1)
   
2. Gently push the outer foil in the way as illustrated. Then it will pop up from the foil frame. (Fig. 2)
   
3. The new outer foil should be slightly bent and pushed in until it is hooked in the foil frame. (Fig. 3)
   

Replacing the inner blade

1. Remove the inner blade as illustrated. (Fig. 4)
   
   • Do not touch the edges (metal parts) of the inner blade to prevent injury to your hand.
2. Insert the inner blade until it clicks as illustrated. (Fig. 5)
   

Note:

• Turn the shaver off before replacing the outer foil and the inner blade.

Cleaning with the brush

1. Clean the inner blade using the short brush by moving it in direction (A).
   Clean the outer foil, the shaver body and the trimmer using the long brush.
   
   • Do not move the short brush in direction (B) as it will damage the inner blade and affect its sharpness.
   • Do not use the short brush to clean the outer foil.

Replacing batteries

When the blade speed decreases, this indicates that the batteries should be replaced with new ones.

1. Bottom of the shaver, turn the battery cover release dial to "open" position then remove the battery cover. (Fig. 1)
   
2. Remove the old batteries.
3. Insert two new AA alkaline batteries. (Fig. 2)
   
4. Reattach the battery cover and turn the battery cover release dial to "close" position. (Fig. 3)
   

Notes:

• Turn the shaver off before replacing batteries.
• Before replacing the batteries, wipe the shaver free of moisture to prevent the inside from getting wet.
• Do not use a new battery together with an old one.
• Do not use rechargeable batteries. Doing so may result in the leakage of battery and the malfunction.
• Please make sure that the old batteries are disposed of at an officially assigned location, if there is one in your country.
• If the shaver will not be used for a long time, please remove the batteries.

FOR YOUR CONVENIENCE,WE HAVE ESTABLISHED A TOLL-FREE (IN USA ONLY) NATIONAL ACCESSORY PURCHASE HOT LINE AT 1-800-332-5368.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Panasonic ES3831 / ES3832 / ES3833 - Cordless Shaver Manual