AEG F56352IM0 User Manual page 32

32 www.aeg.com
and
display is blank.
2. Press Option.
• The indicators
• The indicator
flash.
• The display shows the current
setting.
–
notification activated.
–
notification deactivated.
3. Press Option to change the setting.
4. Press the on/off button to confirm
the setting.
6.4 Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic
signal is deactivated but it is possible to
activate it.
How to activate the acoustic
signal for the end of
programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously Delay and Start
until the indicators
and
display is blank.
2. Press Delay.
• The indicators
• The indicator
• The display shows the current
setting:
–
–
3. Press Delay to change the setting.
start to flash and the
, and
go off.
continues to
= rinse aid empty
= rinse aid empty
,
start to flash and the
,
go off.
continues to flash.
= Acoustic signal off.
= Acoustic signal on.
4. Press the on/off button to confirm
the setting.
6.5 AirDry
AirDry improves the drying results with
less energy consumption.
While the drying phase
operates, a device opens the
appliance door. The door is
then kept ajar.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
open. This can cause
damage to the appliance.
AirDry is automatically activated with all
programmes excluding
(if applicable).
To improve the drying performance refer
to the XtraDry option or activate AirDry.
How to deactivate AirDry
,
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously Delay and Start
and
until the indicators
and
display is blank.
2. Press Start.
• The indicators
go off.
and
, ,
start to flash and the
, and