Removing And Replacing The Transceiver Pc Board And Keypad Pc Board - Motorola C331 Service Manual

Disassembly

Removing and Replacing the Transceiver PC Board and Keypad PC Board

G
28
1. Remove the rear housing cover, battery, antenna, endo housing, and front endo
housing as described in the procedures.
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent ESD and component damage.
2. Insert the flat end of the disassembly tool between the keypad PC board and
the transceiver PC board as shown in Figure 16.
3. Gently twist the disassembly tool to unseat the keypad PC board from its
connector socket on the transceiver PC board.
CONNECTOR
KEYPAD PC BOARD
Figure 16. Removing and Replacing the Keypad PC Board
TRANSCEIVER BOARD
SOCKET
July 19, 2002
020452o
6881040B85