Motorola C331 Service Manual page 10

Specifications
RF Power Output
Analog 800 MHz RF Power Output
nominal
Digital 800 MHz RF Power Output
nominal
Digital 1.9 GHz RF Power Output
nominal
Automatic Power Control Cellular,
PCS, TDMA
Automatic Power Control for AMPS
Maxim Transmit Channel Capability
Audio Distortion
Voice Modulation
Error Vector Magnitude
Receive Sensitivity
FM hum and noise (C-MSG weighted)
Audio Distortion
Transmit Audio Sensitivity (AMPS)
Transmit Audio Sensitivity (CELL and
PCS TDMA)
Adjacent and Alternate Channel
Desensitization
IM (AMPS)
IM (CELL and PCS TDMA)
Modulation Type
Frequency Stability
Duty Cycle
Error Vector Magnitude
Receive Sensitivity
Adjacent and Alternate Channel
Desensitization
Vocoder
6
Transmitter Function
Receiver Function
TDMA System Specification
Specification
-5.5 to +26 dBm (PL 10 to PL2 for CELL
and PCS TDMA
2.38 to +25 dBm (PL10 to PL2 for AMPS
0.407 Watts (26.1 dBm)
0.467 Watts (26.7 dBm)
0.363 Watts (25.6 dBm)
-5.5 to +26 dBm (PL10 to PL 2)
2.38 to +25 dBm (PL 8 to PL 2)
1 to AMPS, 3 to CELL and PCS TDMA
Less than 5% at 1004 Hz, +/- 8 kHz peak
frequency deviation (AMPS)
Maximum + 12 kHz deviation (AMPS)
12% for CELL and PCS TDMA
Specification
-110 dBm for 3% static BER (PCS and
CELL TDMA)
-116 dBm for 12 dBm SINAD for AMPS
-32 below at 1004 Hz, +/- 8kHz peak
deviation (AMPS)
Less than 5% at 1004 Hz, +/- 8 kHz peak
frequency deviation (AMPS)
TOLR of -46 dB nominal
9 kHz deviation (nominal) at 97 dB SPL
input at 1 kHz
3% BER max at 107 dBm signal; -94 dBm/
30 kHz, -65 dBm/60 kHz
Greater than 65 dB
3% BER max @107 dBm signal; @ -
45 dBm to 2 interferer's
P 1/4DQPSK
+/- 200 Hz (TDMA), +/- 2.5 PPM (AMPS)
1/3 (CELL and PCS TDMA)
Continuous (AMPS)
Error Vector Magnitude [EMV1] 0.01% to
8%
Error Vector Magnitude [EMV10] 0.01% to
25%
-110 dBm for 3% static BER
-110 dBm for 3% static BER
ACELP
July 19, 2002 6881040B85