Husqvarna PW 350 Operator's Manual page 19

can be dangerous to
the health. Use breathing
protection with class FFP2
or equivalent if you operate
the product in environments
where dangerous aerosols
can be formed.
Safety devices on the product
WARNING: Read the
warning instructions that
follow before you use the
product.
• Do not use a product
with safety devices that are
damaged or do not operate
correctly.
• Do not remove or make
modifications to safety
devices.
• Do a check of the safety
devices regularly. If the safety
devices are damaged or do
not operate correctly, speak
to your Husqvarna service
agent.
Power trigger lockout
The power trigger lockout (A)
prevents accidental operation of
the power trigger (B). When
the power trigger lockout is in
the locked position, the power
trigger cannot be pushed in.
• PW 350
2167 - 004 - 18.12.2023
(Fig. 13)
• PW 360 and PW 370
(Fig. 14)
Power trigger
The product starts when the
power trigger is pushed in. The
product stops when the power
trigger is released.
Thermal protector
The product has an automatic
thermal protector. If the product
becomes too hot, the thermal
protector will stop the power
supply to the product. If the
thermal protector has stopped
the power, wait until the product
is cool. The thermal protector
will reset automatically when
the product is sufficiently cool.
Hydraulic relief valve
The product has an integrated
hydraulic relief valve that
prevents too high pressure in
the system.
Safety instructions for
maintenance
WARNING: Read the
warning instructions that
follow before you do
maintenance on the
product.
19