Husqvarna PW 350 Operator's Manual page 17

• If you use a cleaning agent,
follow the safety instructions
for the cleaning agent.
• Use only cleaning agents
recommended by Husqvarna.
Other cleaning agents or
chemicals can affect the
safety of the product.
• Use correct water pressure
and cleaning agents, and
use the product only for the
tasks given in this manual.
If you use incorrect water
pressure, cleaning agent, or
use the product for other
tasks than the tasks given
in this manual, it can cause
damage to the product,
surfaces, materials or other
devices. Husqvarna does not
accept liability for damage
that is caused by incorrect
use.
• It is not recommended that
you connect the product to
potable water mains. If you
must connect the product to
potable water mains, obey
local and national regulations.
Use a backflow preventer (not
included) if it is necessary.
Water that has flowed through
a backflow preventer is
considered to be non-potable.
• Do not spray flammable
liquids. Risk of explosion.
• Do not let children operate
the product.
2167 - 004 - 18.12.2023
• Children must be supervised
not to play with the product.
• Do not let persons operate
the product without training.
• Use only accessories and
spare parts that are approved
by Husqvarna.
• Make sure that the electric
connection is made by an
approved electrician and that
it complies with IEC 60364-1.
• Use a residual-current device
that stops the electricity if the
leakage current is more than
30 mA for 30 ms. If you do
not have a residual-current
device, use a device that will
prove earth circuit.
• Use motor start/delayed fuses
with characteristic C or D
according to IEC 898-1 or
IEC947-2, or corresponding
standards outside IEC.
• PW 370 impedance
information: When connecting
the high pressure washer PW
370 to a power supply, the
maximum allowed impedance
is 0.144 Ω (Zmax). Consult
with the power supply
authority to make sure that
the equipment is connected
only to a power supply that
has the maximum allowed
impedance or less.
• No actions are needed for
adjusting products marked
17