Table of Contents
Advertisement
If one or more sites are not available, the display shows Not all sites available. Repeat
3.
5. To return to the Home screen, press the Menu Select button directly below Exit.
Result: The SSA Alert for all sites stop.
7.24.8
Stopping SSA Notification of All Available Sites
Procedure:
1.
or
to SSA.
2. Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
3.
or
to Stop Alert and press the Menu Select button directly below Sel.
The display shows the Select Site screen.
4.
or
to [All Avail] and press the Menu Select button directly below Send.
The display shows Sending req.
If radio is out of range, roaming to a foreign system or in a failsoft situation, the display shows Req
failed.
If the request is successful, the display shows Req successful.
5. To return to the Home screen, press the Menu Select button directly below Exit.
Result: The SSA Alert for all available sites stop.
7.25
Utilities
This chapter explains the operations of the utility functions available in your radio.
7.25.1
Selecting the Power Level
This feature enables you to select the power level at which your radio transmits. The radio always turns on
to the default setting. These reduced transmit power level settings do not affect the receiving performance of
your radio, nor diminish the overall quality of the audio and data functionality of the radio given the following
conditions. Power level Low enables a shorter transmitting distance to conserve power. Power level High
enables a longer transmitting distance.
Prerequisites: This feature must be preprogrammed by a qualified radio technician.
Procedure:
1. Selecting the Power Level using the Transmit Power Level switch:
a. Use the preprogrammed Transmit Power Level switch to toggle the power level between low and
high power.
2. Selecting the Power Level using the radio menu:
MN001824A01-AT
Chapter 7: Advanced Features
step
117
Advertisement
Table of Contents
