Fixing Temperature Mode Switch - Canon imagePRESS C7000VP Reference Manual

Fixing Temperature Mode Switch

Depending on the paper, adjusting the temperature of the fixing unit
may be required. This process takes a long time and may result in a
slight decrease of the machine's productivity. You can prevent this
problem by setting the Fixing Temperature Mode Switch to
[Productivity Priority].
1
➞ [System Settings] ➞ [Device Management
Press
Settings] ➞ [Fixing Temperature Mode Switch].
2
Select [Productivity Priority] or [Image Priority].
Details of each item are shown below.
[Productivity Priority]: This mode is the default setting that gives priority to
the productivity of the machine. However, the
glossiness of output prints may slightly change.
[Image Priority]: This mode gives priority to the image quality. When
this mode is set, the productivity of the machine may
slightly decrease.
3
Enter values for <Frequently Used Min. Basis Weight> and
<Frequently Used Max. Basis Weight>.
If you select [Productivity Priority] for the Fixing Temperature Mode
Switch, you may be able to obtain a better result if you set up the
value for <Frequently Used Max. Basis Weight> as follows.
Max. Basis Weight
• Not using coated paper thinner than 128 g/m
• Using paper heavier than 257 g/m
2
300 g/m stitched documents
• Considering that a gloss of 257 to 300 g/m
important than a gloss of 151 to 256 g/m
• Rarely using coated paper thinner than 128 g/m
2
256 g/m • Not using paper heavier than 257 g/m
(Default Settings)
• Considering that the glossiness of 151 to 256 g/m
important than the glossiness of 257 to 300 g/m
• Often using coated paper thinner than 128 g/m
2
209 g/m • Rarely using coated paper thinner than 105 g/m
• Also using paper heavier than 181 g/m
• Often using coated paper thinner than 105 g/m
2
180 g/m
• Not using coated paper heavier than 181 g/m
Setup Criteria
2
2
as the cover for saddle
2
paper is
2
paper.
2
2
2
paper is
2
paper.
2
2
2
2
2
Device Management Settings A6-82