Electrolux 7 Series Service Manual page 14

Hide thumbs Also See for 7 Series:
Table of Contents

Advertisement

End of cycle
End of the programme is indicated by a permanently lit zero
(when the door can be opened).
Appliance stopping with water in the tub, at the end of
programmes with the RINSE HOLD option, is displayed by
a permanently lit zero. The LED indicating the door remains on
and the LED of the START/PAUSE button is turned off. The
washing machine continues to operate, rotating the drum once
every 2 minutes.
Alarm code
Indicates an error in the appliance operation. Simultaneously to the
displaying of the code, the START/PAUSE button flashes.
Laundry load calculation
Only for appliances with PROPORTIONAL programmes.
After the washing programme has started, the dot starts to flash.
The washing machine is now calculating the laundry load inside the
drum. When this phase is completed, the dot is lit continuously and
the three digits display the programme time.
Buzzer
It consists of a multi-tone buzzer and sounds in the following cases:
− When the appliance is turned on and off, it plays two different musical tunes.
− If a button is pressed, it emits a short "Click"
− When the cycle has ended, this is indicated by a special sequence of "three long beeps" repeated at 15"
intervals for two minutes.
− In the event of an appliance malfunction, this is indicated by a special sequence of "three short beeps"
repeated three times at 15" intervals for 5 minutes.
All the appliances are fitted with the buzzer. They leave the factory with the option enabled. Use the key
combination to disable it.
The volume has a factory setting which cannot be adjusted by the user.
When the buzzer is disabled (using the key combination), it only emits a short "Click" and the sequence of
"three short beeps" when an alarm occurs.
The buzzer can be enabled/disabled during the programme selecting phase but the alarm signalling remains enabled.
SERIES 7
To enable it, press the buttons simultaneously for 5 seconds. A short beep will confirm it has been enabled/disabled.
2010 dmm
SERIES 8
14/96
SERIES 9
599 73 68-54

Advertisement

Table of Contents
loading

This manual is also suitable for:

8 series9 series

Table of Contents