Panasonic KX-T336 System Reference Manual page 636

1.02 Call Transfer by Camp-on to
Station
Description
Allows the attendant to transfer a call to busy
extension.
Transferred call will ring the busy extensior
automatically when it becomes idle.
Programming
Conditions
Busy status of PITS telephone means all
PDNs
on the destination extension are in use.
If Camp-on Transfer cannot be set (for example,
the destination extension is in program mode),
the following message appears on the message
. line on the screen:
1 Message: Camp-on deny. ]
If camped on call is not answered in preassigned
interval, transfer recall starts at the attendat
console.
The time taken to activate transfer recall is set by
"System-System Timer", Transfer Recall.
Operation
During a conversation with an outside party or
extension. The SW indicator is lit.
1. Press the HOLD key.
l
The SRC indicator starts to
flash in 60 wink, and the DES
indicator lights.
2. Dial the extension number of the
destination.
l
Busy tone sounds on DES side
of the LOOP key.
I 1 3. Press the RELEASE key.
.
Both SRC and DES indicator
lights go out and the attendant
console becomes silent.
Transferred party is placed on
hold until the destination
extension answers.
Ringing starts at the
destination extension, as soon
as it becomes idle.
If the destination answers,
conversation with the
transferred party starts.
6-G-2