Transfer Recall - Panasonic KX-T336 System Reference Manual

3.00 Transfer Recall
Description Conditions
If a call tratsferrec by the Unscreened Call
Transfer. Camp-@ Transfer or Ringing Transfer
function is not answered by the destination party
within a preprogrammed time period, the call will
return to the extension user or attendant console
that transferred the call.
When there are more than one parties on hold,
this function is started from the earliest time for
the transfer operation.
When the handset is on-hook or off-hook, the
Transfer Recall call signal or call waiting tone,
respectively, enables the party attempting the
transfer to be advised that the call has not been
answered. The call waiting tone sent when the
handset is off-hook, is heard through the speaker
in the case of a PITS and through the handset in
the case of an SLT.
In a PITS,
the
CO line and extension Transfer
Recall call signals have the same ringing pattern
as the CO line and extension incoming call
signals,
and a
monotone call signal is sent.
While the Transfer Recall call signal or call
waiting tone is being sent, if your PITS has a
display, it shows:
l
When the transfer destination extension does
not have a name programmed:
The time taken to ac$ivate this function for the
extension or attendant console is set by "System-
System Timer", Transfer Recall.
Programming
I
System Programming
Reference
VT
I
Dumb
"System-System TimeP,
Transfer Recall
_..
<Example>
RCL: Ext 1234
-r
L Extension number (DN)
l
When the transfer destination extension has a
name programmed:
<Example>
In an SLT, the CO line and extension Transfer
Recall signals are exactly the same as the CO
line and extension incoming call signals.
~.
3-E-3