Sony RDR-VX515 Operating Instructions Manual page 98

Video cassette recorder/ dvd recorder
Hide thumbs Also See for RDR-VX515:
Table of Contents

Advertisement

lo:1o AM
If you connect a component
that does not accept
die selected
audio signal, a loud noise (or no
sound) will come out from the speakers,
and may
attbct your ears or cause speaker damage.
• Dolby Digital Output (DVDs only)
Selects the type of Dolby Digital signah
D-PCM
Select this when the recorder
is connected to an audio
component lacking a builtdu
Dolby Digital decoder. You
can select whether the
signals conform to Dolby
Surround or not by making
adjustments to the
"Duwnmix" item in "Audio"
setup (page 98).
DoIby
Select this when the recorder
Digital
is connected to an audio
component with a builtqu
Dolby Digital decoder.
• DTS (DVD VIDEOs
only)
Selects whether or not to output DTS signals.
On
Select this when the recorder
is connected to an audio
component with a built-in
DTS decuder.
Off
Select this when the recorder
I
is connected to an audio
component withuut a built-in
DTS decoder.
Downmix (DVDs only)
Switches tire method l\u" mixing down to two
channels
when you play a DVD which has rear
sound elements (channels)
or is recorded
in Dolby
Digital l\>rmat. For details on the rear signal
components,
see "t_ Connecting
to audio L/R
jacks" on page 18. This function affects the output
of the l\41owiug jacks:
-LINE
OUT (AUDIO L/R) jacks
AUDIO OUT L/R jacks
-DIGITAL
AUDIO
OUT (OPTICAL
or
COAXIAL)
jack when "Dolby
Digital Output"
is set to "D-PCM"
(page 97).
DolW
Surround
Normal
Normally select this
position.
Multi<hannel
audio signals
are output to twu channels
for ertjoyiug surround
SUUlrds.
Multi<hauuel
audio signals
are dowumixed to twu
channels lk_ruse with your
stereo.
AudioDRC(Dynamic Range Control) (DVDs
only)
Makes the sound clear when tlre volume is turned
down when playing a DVD that coulorms to
"Audio DRC." This affects tile output fi÷om the
R)llowing jacks:
-LINE OUT (AUDIO L/R)jacks
AUDIO OUT L/R jacks
-DIGITAL AUDIO OUT (OPTICAL or
COAXIAL) jack only when "Dolby Digital
Output" is set to "D-PCM" (page 97).
Standard
Wide
Range
Normally select this
position.
Gives you the feeling of
being at a live performance.
ScanAudio (DVDsonly)
On
Outputs audio signals during
I
FFI fast-forward
of a DVD
disc with Dulby Digital
sou udtracks.
Off
No sound is output during
FFI fast-forward.
g8

Advertisement

Table of Contents
loading

Table of Contents