Black & Decker LSW40C Instruction Manual page 39

NOTE: Battery packs should not be stored
completely depleted of charge. The battery
pack will need to be recharged before use.
CHARGING PROCEDURE
BLACK+DECKER chargers are designed to
charge BLACK+DECKER battery packs.
NOTE: To ensure maximum performance
and life of lithium ion BATTERY PACKS:
• Charge the battery pack fully before
first use.
• Recharge discharged batteries as
soon a possible after every use.
• Do not discharge batteries fully.
BLACK+DECKER Battery and Charger Systems
Chargers/Charge Time** (Hours) (0% - 100%
40V MAX* Watt
Batteries Hours
LBX36 47
LBXR36 60
LBX1540 60
LBXR2036 80
LBX2040 80
LBXR2540 100
LBX2540 100
**All charge times are approximate. Actual charge
time may vary.
1. Plug the charger into an appropriate
outlet before inserting the battery pack.
2. Insert the battery pack into the charger.
3. The green LED will flash indicating
FUNCTIONAL DESCRIPTION
1. Variable speed trigger
2. Handle
3. Lock off button
4. Battery
5. Charge indicator
6. Auxiliary handle
7. Auxiliary handle button
8. Adjustment collar
9. Trimmer head
10. Edge guide
11. Guard
12. Spool housing
13. Spool cap
charge)
40V MAX* Chargers
LCS36 LCS40 LCS436
1 1
1.25 1.25
1.25 1.25
1.5 1.5
1.5 1.5
1.75 1.75
1.75 1.75
10
12
that the battery is being charged.
4. The completion of charge is
indicated by the green LED
remaining on continuously. The pack is
fully charged and may be used at this
time or left on the charger.
Recharge discharged batteries as soon
as possible after use or battery life may
be greatly diminished.
CHARGER DIAGNOSTICS
This charger is designed to detect certain
problems that can arise with the battery packs
or the power source. Problems are indicated
by one LED flashing in different patterns.
BAD BATTERY
The charger can detect a weak or
damaged battery. The red LED
flashes in the pattern indicated on the
label. If you see this bad battery blink
pattern, do not continue to charge the
3.25
battery. Return it to a service center or a
3.75
collection site for recycling.
3.75
HOT/COLD PACK DELAY
5
When the charger detects a battery
that is excessively hot or excessively
5
cold, it automatically starts a Hot/Cold Pack
6.25
Delay, suspending charging until the
6.25
battery has normalized. After this happens,
the charger automatically switches to the
Pack Charging mode. This feature ensures
maximum battery life. The red LED flashes
in the pattern indicated on the label when
the hot / cold pack delay is detected.
LEAVING THE BATTERY IN THE CHARGER
The charger and battery pack can be left
6
8
9
11
13
6
2 5
3
4
1
7