Using The Device; Selecting An Input Source; Ifp Series - ViewSonic VPC35 User Manual

Using the Device

Selecting an Input Source

IFP Series

To select an input source:
1. Press INPUT/
panel, or press the Settings icon from the toolbar to display the Input Settings
menu.
2. Press ▼/▲/◄/► on the remote control to select the PC source.
3. Press OK/ENTER on the remote control, or touch the input source directly.
4. Press EPG/BACK/
menu to exit.
NOTE: The above image is for reference only and is subject to change without
notice.
on the remote control, press the setting button on the front
on the remote control, or touch a blank area outside of the
8