Main Menu; Table 2 Bios Main Menu; Table 3 Ide Device Setting Menu - ViewSonic VOT125 User Manual

Main Menu

The BIOS Setup is accessed by pressing the DEL key after the Power-On Self-Test
(POST) memory test begins and before the operating system boot begins. Once you
enter the BIOS Setup Utility, the Main Menu will appear on the screen. The Main
Menu provides System Overview information and allows you to set the System Time
and Date. Use the "<" and ">" cursor keys to navigate between menu screens.
M a i n A d v a n c e d
System Date
System Time
> SATA 1
> System Information
Below table is described for SATA 1 setting.
M a i n A d v a n c e d
Primary Master
Device
Vendor
Size:
LBA/ Large Mode
DMA Mode
S.M.A.R.T
LBA/ Large Mode [Auto]
Enables or disables the LBA (Logical Block Addressing)/ Large mode. Setting to
Auto enables the LBA mode if the device supports this mode, and if the device was
not previously formatted with LBA mode disabled.
Options: Disabled, Auto
ViewSonic VOT125

Table 2 BIOS Main Menu

BIOS SETUP UTILITY
B o o t
[Wed 10/21/2009]
[10:18:15]
:[WDC WD1600BEV]
V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.

Table 3 IDE Device Setting Menu

BIOS SETUP UTILITY
B o o t
:Hard Disk
:WDC 1600BEVT-00ZCT0
:160.0GB
[Auto]
[Auto]
[Auto]
V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
C h i p s e t P o w e r
C h i p s e t P o w e r
S e c u r i t y E x i t
Use [ENTER], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system Time.
<> Select Screen
↑↓ Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
S e c u r i t y E x i t
Disable: Disables LBA Mode.
Auto: Enables LBA Mode if the
device supports it and the
device is not already formatted
with LBA Mode disabled.
<> Select Screen
↑↓ Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
14