Power Adapter & Batteries; Recordings - Honeywell FFP21632 User Manual

USE AND OPERATION (CONTINUED)
Light indicators (continued)
Fast Flash: Flashing twice in 1s means Wi-Fi connection has been established.
Slow Flash: Flashing once in 3s means hotspot connection has been
established.
Steady On: Successfully connected to network.
Change of Mode: Steady light on for 6s.
Red Light:
Battery Powered: Steady red light on. If the light is flashing red, there is an
issue with the motor. Check the motor to ensure it is functioning properly.
Unlocking/Locking: Flashing twice.
Change of Mode: On for 6s.
Power Adapter & Batteries
This product includes a DC5V power adapter. For a backup power supply,
three D batteries are required. Please note, when battery powered, the feeder
only retains the timed automatic feeding function set by the Honeywell
Smart Pets App, all other functions cannot be used without the power adapter.
Battery Instructions:
1. Add three D batteries for back up power supply.
2. The feeder needs to be powered off when adding or replacing batteries.
3. When depleted, batteries should be removed and placed in a dedicated
storage point for waste batteries. If leakage occurs, please clean the
battery compartment immediately.

Recordings

After the feeder is configured, a recording can be added. The recording will
play anytime food is dropped into the feeding tray (manually or digitally through
the Honeywell Smart Pets App), alerting your pet that it's time to eat.
EN 6