Installation; Use And Operation; Control Panel - Honeywell FFP21632 User Manual

INSTALLATION

Device Set Up
1. Twist off feeder lid to find the power cord and feeding tray inside.
2. Plug the feeding cord into the bottom of the feeder and string the cord
through the gap that leads to the edge of the feeder to ensure it will sit flat
on a table or surface.
3. Remove the feeding tray from plastic and slide the pegs under the
bottom front of the feeder into the holes in the back of the feeding tray.
This should slide on easily and does not require force.
4. Plug the cord into an outlet for power. The device must be plugged into a
power outlet to connect to the Honeywell Smart Pets App.
5. Add three D batteries for a backup power source.
6. To prepare your feeder for use, add dry kibble inside the top storage compartment.
For manual food delivery, press the "Feed" button to release a single portion,
roughly one tablespoon of kibble. You can press the "Feed" button multiple
times until your desired amount of food fills the bowl. You can also use the
Honeywell Smart Pets App to pre-program scheduled feedings. Portions can be
controlled from 1 tbsp to ³
consult with your veterinarian for feeding recommendations).

USE AND OPERATION

Control panel

1. Recording Button
2. Lock Button
3. FEED Button
4. SET Button
cup per meal, up to 10 meals per day (please
/
FEED
1 2 3
EN 4
SET
4