Table of Contents
Advertisement
USE AND OPERATION (CONTINUED)
Function buttons
Record button
Press and hold button to hear a single "beep" to begin recording. To stop
recording, release the button, listen for 2 "beep" sounds which indicates
that the recording is complete. The maximum recording time is 10 seconds.
If not satisfied, you can repeat the steps to re-record. This recording will
play anytime food is dropped into the feeding tray, alerting your pet that
it's time to eat.
Lock button
Press and hold, then wait for red light to flash twice to lock. In locked state,
feeding button is disabled to prevent accidental press by pet or children.
To unlock, press and hold again for red light to flash twice.
FEED button
FEED
To manually dispense dry pet food, press "FEED" button once. Upon pressing
the button, your recording will also play.
SET button
SET
Network Mode Switch or Device Reset. You do not need to push this
button to connect to Wi-Fi, the Feeder will automatically be in this mode
and ready to connect once plugged in. To change the network configuration
or reset the device follow the below steps:
• To switch the connection mode, press and hold this button for 7 seconds
and wait for it to "beep" 3 times. The red/blue indicator light will be on for
6 seconds then switch to slow flashing to signal the transition to a hot
spot connection mode.
• After the machine is configured, press and hold the button again until it
"beeps" 3 times. The red/blue indicator lights will stay on for 6 seconds
indicating that the device has been restored to factory settings.
Light indicators
Blue Light:
Turn on: Fast flash for 3s
EN
5
Advertisement
Table of Contents
