Miele PLW 8617 Safety Operating Instructions Manual page 61

Press the button for the required reprocessing programme.

The following message will appear on the display:
Programme test: Skip programme block with . Door can be opened at
end of each programme block.
Press OK to confirm the message.

The programme start screen is displayed.
Press the  button.

The  button is displayed – the start of the reprocessing programme
is delayed.
Before the water intake, the relevant programme phases displayed
can be skipped by pressing the  button.
After each programme block, the following message will appear on
the display before the wash water is drained:
Programme test: Door can be opened to take sample.
Press OK to confirm the message.

The  and  buttons are enabled.
To take a sample, press the  buttons to open the door.

Once you have taken the sample, press the  button to close the

door.
The following message will appear on the display:
Continue programme test? To continue, press OK. To open the door
again, press .
.
Press OK to confirm the message.

The wash water is drained and the next programme block begins.
If a sample does not need to be taken after a programme block:
Press the  button.

The wash water is drained and the next programme block begins.
You can skip each programme block when it begins by pressing the
 button.
System settings
.
.
61