Miele PLW 8617 Safety Operating Instructions Manual page 17

Table programme
sequence display
Once you have switched to the table display of the programme se-
quence using the  button, the following data is shown:
- Block name
- Time remaining in the programme phase
- Holding time
- Programme parameters with the associated expected and actual
values and minimum/maximum values achieved
You can scroll to other pages using the scroll bar.
The maximum possible programme parameters are as follows:
- Material number and Date of manufacture of the mobile unit
- Cycle number
- User information: First name, Last name, User level
- Temperature of the wash water, measured values from sensors 1
and 2
- Temperature in the dispensing phases 1 to 3, measured values of
sensors 1 and 2
- Temperature of the air during drying inside in phases 1 and 2
- Temperature of the air during drying outside in phases 1 and 2
- Water volumes in the programme step and the programme phase
- Dispensed quantities of the dispensing systems used
- A0 value
- Conductivity in the water intake and drainage
- Wash pressure for the inner wash water circuit and the PowerPulse-
Cleaning
- Spray arm speeds
Product description
17