Table of Contents
Advertisement
End of programme
After the programme has ended, the following is displayed:
- The Cycle number
- The time elapsed since the end of the programme
- The Result of the reprocessing process
Programme finished
- The message
The progress bar changes from white to green.
The wash chamber lighting can be switched on automatically de-
pending on the pre-setting.
Cancelling a programme
A reprocessing programme can be cancelled at any time. The wash
water is drained, then the door on the infeed side is released.
Press the button.
A confirmation prompt is displayed:
Cancel programme?
Confirm the confirmation prompt with
Once the water has finished draining, the following message will ap-
pear on the display:
Programme cancelled
The progress bar is red and the following error message is displayed:
Programme aborted by user
Once the error message has been acknowledged, the programme
can be restarted.
Delay start
The start of a programme can be delayed, for example, to benefit
from economy rates of electricity at night. The delay start period can
be set to the exact minute.
If soiling is left to dry on the load for longer, the reprocessing result
can be adversely affected. There is also a higher risk of corrosion
for stainless-steel load items.
To configure a delay start, select the button in the footer.
Enter the
Start time
confirm.
The reprocessing programme starts automatically at the set time.
The automatic programme start can be cancelled at any time. To do
this, press the button in the footer. A confirmation prompt is dis-
Cancel delay start?
played: .
confirmed, the reprocessing programme can be started manually.
.
.
with the on-screen keyboard and press OK to
Once the confirmation prompt has been
Operation
Yes
.
43
Advertisement
Table of Contents
