Table of Contents
Advertisement
Connect the Device
Connect with USB
A scanner or a cordless base can be connected to the USB port of a computer.
1. Connect the appropriate interface cable to the device first, then to the com-
Note: The power supply must be ordered separately, if needed.
2. If you connect a CCB01-010BT-V1N Base, make sure the cables are secured in
3. The scanner beeps.
4. Verify the scanner or cordless base operation by scanning a barcode from the
2
puter.
Corded Voyager XP 1470g
USB Connection:
CCB01-010BT-V1N
Base USB
Connection:
the wireways in the bottom of the cordless base and the base sits flat on a
horizontal surface.
Sample Symbols
in the back of this manual.
Voyager XP User Guide
Advertisement
Table of Contents
