RCD (Residual Current Device). Under no circumstances put a plug on the cable. Failure to comply with these safety instructions will release Buffalo from any responsibility and the warranty will become null and void. • Position on a flat, stable surface.
Page 3
• Keep all packaging away from children. Dispose of the packaging in accordance to the regulations of local authorities. • If the power cord is damaged, it must be replaced by a Buffalo agent or a recommended qualified technician in order to avoid a hazard.
2. Remove the back sheet of the oven. 3. Place the Buffalo 600 series appliance on top of the oven (no need to remove the legs). 4. Fix the appliance and oven together and attach with the M5 bolt screws provided.
Page 5
Electrical wiring DANGER of electric shock from incorrect connection There is a danger to life if the wires are incorrectly connected. Connection to a suitable power supply should only be carried out by a qualified and competent electrical engineer. Warning: The fixed wiring of the power cord connection must be equipped with a disconnect device (leakage protection switch) with a contact distance greater than 30mm according to the wiring rules.
Operation Heating indicator Off position Off position Function knob with on/off switch Fan only Lower element with fan Upper element only Thermostat Upper element with fan Overheat indicator Both elements with fan Before first time use There may be some odour with initial cooking due to insulation materials and heaters. This odour will disappear after a short time.
Thermal Cut-out Reset The appliance is fitted with a Thermal Cut-Out safety switch. Should the temperature exceed safe levels the appliance will automatically cut off power. The thermal Cut-out switch is located on the left rear of the oven. To reset the appliance after a sufficient cool-down period: 1.
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of Buffalo. Every effort is made to ensure all details are correct at the time of going to press, however, Buffalo reserves the right to change specifications without notice.