Table of Contents
Advertisement
Available languages
Available languages
CLEANING & MAINTENANCE (CONTINUED)
Cleaning and Replacement of Components
1.
Air inlet filter is available at authorized vacuum cleaner vendors. Please only
use manufacturer's replacement parts.
2.
It is recommended to clean the dust cup after each use. In case of blockage
of filter caused by excessive dust accumulation, it needs to be cleaned or
washed, and can be replaced if necessary.
3.
After the electric roller brush is used for a long time, its roller bristles may be
entangled in debris such as hair, which needs to be cleaned in time so that the
vacuum cleaner can work more effectively.
Cleaning the dust cup and filter system
Press
Tank
Release
Button
• Store the appliance indoors. Do not expose the appliance to outdoor weather
conditions, moisture, rain, snow or heat. Do not use or store in temperatures below
41°F (5°C) or above 100°F (38°C). Ensure that the appliance is stored in room
temperature before operating.
• DO NOT IMMERSE THE MOTOR HOUSING, MAIN POWER CABLE OR
ADAPTER IN WATER OR ANY OTHER LIQUIDS.
• DO NOT leave the appliance close to heat sources such as ovens, heaters and
radiators nor allow the cord to come into contact with hot surfaces.
• Clean the appliance only with a dry cloth. DO NOT use any lubricants, cleaning
agents, polishes or air fresheners on any part of the appliance.
3
4
7
1
Turn Right
to Open
5
8
EN | 17
Press Dust Tank
2
Release Button
6
2
Turn Left to Close
1
Advertisement
Table of Contents
