What To Do If - Zanussi ZKT 652 DBV User Information

What to do if ...

Problem
The appliance cannot be switched
on or is not operating
The cooking zones automatically re-
duce the cooking level to
The residual heat indicator is not
displaying anything
acoustic signal sounds, appliance
switches off
A signal sounds when the appliance
is switched off
The appliance switches off, a signal
sounds repeatedly
The sensor fields cannot be operat-
ed
Display is switching between two
heat settings
lights up
16
Possible cause
More than 10 seconds have passed
since the appliance was switched on
The lock is switched on
The child safety device is switched
on
Several sensor fields were touched
at the same time
Automatic switch off has been trig-
gered
Dirty control panel
The sensor fields are partly covered
by a damp cloth or with liquid
The cooking zone was only on for a
short time and is therefore not hot
One or more sensor fields have
been covered for longer than 10
seconds
The control panel is partially or com-
pletely covered by objects
The control panel was covered too
long
A single sensor field was covered
for a short period
Power management is reducing the
power of this cooking zone
Unsuitable cookware
No cookware on the cooking zone
The diameter of the bottom of the
cookware is too small for the cook-
ing zone
Downloaded from www.vandenborre.be
Remedy
Switch the appliance on again.
Switch off the lock (See the section
"Locking/unlocking the control pan-
el")
Deactivate child safety device (See
the section "Child safety device")
Only touch one sensor field
Remove any objects (pan, cloths,
etc.) that are lying on the control
panel. Switch the appliance on
again
The sensor fields must be dry and
fat-free.
Remove the cloth or the liquid.
Reset the cooking level required.
If the cooking zone is supposed to
be hot, call the Customer Service
Department.
Uncover sensor field
Remove the objects
The appliance will be fully functional
after about 50 seconds
The sensor field is automatically re-
leased after about 10 seconds
See the section "Switching the pow-
er function on and off"
Use suitable cookware
Place cookware on the cooking
zone
Move onto a smaller cooking zone
Use suitable cookware