What To Do If - Zanussi ZGS685CTX User Manual

• To make burners work correctly, make sure that the
arms of the pan supports are in the centre of the burn-
er.
• Be very careful when you replace the pan supports to
prevent the hob top from damage.
After cleaning, dry the appliance with a soft cloth.
The stainless steel can become tarnished if it is too much
heated. Refer to this you must not cook with potstones,
earthenware pans or cast iron plates. Do not use alumini-
um foil to prevent damage the top during operation.
Removing the dirt:
1. – Remove immediately: melting plastic, plastic foil,
and food containing sugar.
– Stop the appliance and let it cool down before you
clean: limescale rings, water rings, fat stains, shi-
ny metallic discolorations. Use a special cleaner
applicable for surface of hob.

What to do if...

Problem
There is no spark when lighting the
gas
The flame is blow out immediately af-
ter ignition
The gas ring burns unevenly
2. Clean the appliance with a damp cloth and some de-
3. At the end rub the appliance dry with a clean cloth.
In order to properly place the pan supports, make sure
that the arms of the pan support are positioned in corre-
spondence with the hole placed at the base of the burner.
This way, the pan support will be stable and fixed.
Cleaning of the spark plug
This feature is obtained through a ceramic ignition candle
with a metal electrode. Keep these components well clean
to prevent difficult lighting and check that the burner
crown holes are not obstructed.
Periodic maintenance
Periodically speak your local Service Force Centre to
check the conditions of the gas supply pipe and the pres-
sure adjuster, if fitted.
Possible cause
• There is no electrical supply
• Burner cap and crown are placed
uneven
• Thermocouple is not heated suffi-
cient
• Burner crown is blocked with food
residues
tergent.
• Make sure that the unit is connec-
ted and the electrical supply is
switched on.
• Control the fuse. If the fuse is re-
leased more than one time, refer
to a qualified electrician.
• Make sure that the burner cap and
crown are in correct positions.
• After lightning the flame, keep the
knob pushed for approximately 5
seconds.
• Make sure that the injector is not
blocked and the burner crown is
clear of food particles.
Remedy
33