Table of Contents
Advertisement
88
4@
GOTO
18
5@
END
Symbol indicating the
a
to Naa a
Fabre
wees Tet "7S
Blinks—t
—
program areas.
*The computer is provided with 10 program areas (PO ~ P9)
in which multiple
programs can be stored separately. The program area can be
changed by press-
5-1
Writing Programs
The number at the upper right part of the display indicates the remaining capac-
ity (number of bytes) of the area in which programs or data can be written (free
area). The free area will be 15584 bytes, when nothing is written and these
numbers will decrease each time a program or data is written.
This operation erases the programs in all program areas and variable contents,
and prepares program area PO.
Let us now write the previously mentioned program.
AeA Ten) pI Kedah
CK
bs
26MEBwWRmHWSITRIK
HEI5Es)
SS)
ooh ES Gar 4
Yee (=) or]
FV
ee
AGlere3
eed
ole.
E JUN JCD Jlexe
The program will be stored with the above key operation. Do not forget to press
the & key at the end of each line since the line will be stored only by pressing
©«] . Since one-key input is also possible for frequently used commands such as
INPUT
and PRINT, speedy inputs will be possible. (For example, the five
characters "INPUT" can be input by pressing]
).
COIW(PI@IGH can also be
applied.)
© Method of Correcting Program Errors
1) When an error is found during input before @4 is pressed:
Move the cursor to the error position by a cursor movement key ( [4] or &))
and correct the error. (Same as in Chapter 2)
2) When an error is found after storing the line by pressing &@ :
Enter LIST line No.
in the WRT mode to display the contents of the line
and correct as in 1) above.
fq
89
Advertisement
Table of Contents
