Casio FX-795P Owner's Manual page 3

Hide thumbs Also See for FX-795P:
Table of Contents

Advertisement

Foreword
Prior to Operation
This computer was delivered to you through CASIO's strict testing process, high
level electronics technology, and strict quality control.
To ensure a long life for your computer, please observe the following precau-
tions.
= Utilization Precautions
© Since this computer consists of precision electronic parts, do not disassemble
it. Also do not apply an impact to it by throwing or dropping it, or do-not
expose it to rapid temperature changes. In addition, do not store it in a place
with high temperatures or high humidity, or in a dusty place. When the com-
puter is utilized in low temperatures, sometimes the display response is slow
or does not operate. When normal temperature conditions are restored, how-
ever, the computer operation will become normal.
Special care should be taken not to damage the computer by bending. For
example, do not carry it in your hip pocket.
@ Devices that can be plugged into the option jack are the Model FA-5, FP-12S,
FP-40 or our specified devices. Do not connect any other devices.
* Use Printer Cable SB-2 when connecting FP-12S, and Interface Pack SB-42
when connecting FP-40.
@ Although the display sometimes becomes faint while the buzzer is sounding,
it is not a malfunction. However, if the display becomes very faint, replace
the batteries with new ones as soon as possible.
e Every two years, replace the batteries with new ones even if the computer is
not used. Do not leave exhausted batteries inside it because trouble may
occur due to battery leakage.
Always keep the cap for the connector portion
in place. Remove it only
when peripherals are to be connected to the computer.
If strong static electricity is applied to the computer, sometimes the memory
content is changed, or key operation cannot be performed. To discharge
static electricity accumulated in your body, touch a metallic substance like a
door knob. If this occurs, remove the batteries, then replace them again.
Always turn computer power off before connecting peripherals.
To clean the computer, do not use volatile liquids such as benzine or thinner.
Wipe it with a soft dry cloth, or a cloth dampened with a neutral detergent
solution.

Advertisement

Table of Contents
loading

Table of Contents