Table of Contents
Advertisement
224
CHAPTER 8
Convenient DATA BANK Function
The telephone number moves one space to the right each time the ) key is
pressed and the name will appear from the left.
Operating @)23 instead of pressing the («) key 6 times displays the data from
the beginning.
If the contents in one record exceed 24 characters, it will not be possible to dis-
play these at one time. The G) key can then be used to shift the display to the
left to bring the characters hidden on the right into view. Pressing fa) will
cause the last 24 characters in the record to be displayed.
8-6 Erasing Data
Erasing memo data can be performed in the EDIT mode as in data correction
(see page 217).
1) To Erase Part of a Record
Display the desired data in the MEMO IN mode and specify the EDIT mode by
pressing a cursor movement key. Then move the cursor to the character that you
wish to erase. Press ba} to erase the character. After erasing unnecessary charac-
ter. After erasing unnecessary characters, be sure to press the Balkey.
2) To Erase All Data in a Record
Display the desired record in the MEMO IN mode and specify the EDIT mode
by pressing a cursor movement key. Then clear the display by pressing the fs
key. And press the Ed
key.
All data in that record will be erased and the current record number will be auto-
matically assigned to the next record.
To erase all data stored in the DATA BANK, execute the NEW# command in
the WRT mode ( fj) ).
NEW
ra kd
The NEW# command
should be executed with caution to avoid erasing any
important data in the DATA BANK.
225
Advertisement
Table of Contents
