Getting Started; Initial Setup; Setting The Date And Time; Setting Tone And Pulse Dialing Mode - Brother MFC-5440CN User Manual

g started
Initial Setup
Setting the Date and Time
When the MFC is not in use it will display the date and time. If you
set up the Station ID the date and time displayed by your MFC will
be printed on every fax you send. If there is a power failure, you may
have to reset the date and time. No other settings will be affected.
1 llnitial Setup
]
2
2. Date/Time
3
4
5
6
Press Menu/Set, 0, 2.
Enter the last two digits of the year.
Press Menu/Set.
Enter two digits for the month.
Press Menu/Set.
(For example, enter 09 for September, or 10 for October.)
Enter two digits for the day.
Press Menu/Set. (For example, enter 06 for 6th.)
Enter the time in 24-Hour format.
Press Menu/Set. (For example, enter 15:25 for 3:25 P.M.)
Press Stop/Exit.
The LCD now shows the date and time whenever the MFC _s in
Fax mode.
Setting Tone and Pulse dialing mode
1 Press Menu/Set, 0, 4.
2
Press • or • to select
Pulse
(or
Tone).
Press Menu/Set.
3 Press Stop/Exit.
lnitial Setup ] 4.Tone/Pulse
GETTING STARTED 2- 1