AEG BP5303071 User Manual page 29

The lamp does not oper-
ate.
The pyrolytic cleaning
does not operate (the
clock display shows
"C1").
The pyrolytic cleaning
does not operate (the
time display shows
"C3").
The display shows
"F102".
The display shows an er-
ror code that is not on
this list.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
12. ENVIRONMENT CONCERNS
Recycle the materials with the
symbol
applicable containers to recycle it.
Help protect the environment and
human health and to recycle waste
Problem
. Put the packaging in
Possible cause
The lamp is defective.
You did not remove the
shelf support / telescop-
ic runners.
You did not fully close
the door, or the door
lock is defective.
• You did not fully close
the door.
• The door lock is defec-
tive.
There is an electrical
fault.
on the front frame of the appliance cavi-
ty.
of electrical and electronic
appliances. Do not dispose
appliances marked with the symbol
with the household waste. Return the
product to your local recycling
Remedy
Replace the lamp.
Remove the shelf sup-
port / telescopic runners.
Fully close the door.
• Fully close the door.
• Deactivate the appli-
ance with the house
fuse or the safety
switch in the fuse box
and activate it again.
• If the display shows
"F102" again, contact
the Customer Care
Department.
• Deactivate the appli-
ance with the house
fuse or the safety
switch in the fuse box
and activate it again.
• If the display shows
the error code again,
contact the Customer
Care Department.
.........................................
.........................................
.........................................
ENGLISH
29