Cisco 8600 Series Manual page 18

Connecting the DC-Input Wires
Figure 25: Remove the Nuts for Grounding
Step 5
Attach the lug to the two posts, secure with the two nuts, and tighten with the torque driver. The fastening
torque is between 2.0 and 2.8 Nm. Do not overtorque.
Note
Figure 26: Tighten the Nuts
Powering on the Router
18
Always use a torque driver when you have to tighten nuts; it prevents you from overtightening
them.
Powering on the Router