Table of Contents
Advertisement
SC-P5300 Series
User's Guide
Replacing Consumables
Replacing Ink Cartridges
If one of the installed ink supply units is expended,
printing cannot be performed.
If an ink cartridge remaining amount falls below the
minimum amount, you can continue printing after
replacing the ink cartridge.
If the remaining ink amount drops yet printing is
continued, then replacement of an ink cartridge
during printing may be required. If you replace it
while printing, colors may look different depending
on how the ink dries. When this is not permissible, we
recommend first replacing the ink cartridge with a
new one before printing. The removed ink cartridge
can be installed again and used until the remaining
amount falls below the minimum amount.
Supported ink cartridges U
Consumable Products" on page 147
You can use the same procedure to replace all ink
cartridges.
c
Important:
Epson recommends the use of genuine Epson ink
cartridges. Epson cannot guarantee the quality or
reliability of non-genuine ink. The use of
non-genuine ink may cause damage that is not
covered by Epson's warranties, and under certain
circumstances, may cause erratic printer behavior.
Information about non-genuine ink levels may not
be displayed, and use of non-genuine ink is
recorded for possible use in service support.
A
Make sure the printer is on.
Maintenance
"Options and
B
Open the ink cartridge cover.
Press the groove in the cartridge cover to open
the cover.
C
Push back the ink cartridge that you want to
replace.
You will hear a click and the ink cartridge pops
out slightly.
123
Advertisement
Table of Contents
