Replacing The Cutter - Epson SC-P5300 Series User Manual

SC-P5300 Series User's Guide

Replacing the Cutter

Replace the cutter when it is not cutting paper cleanly.
Supported cutter
"Options and Consumable Products" on page 147
U
Use a cross-head screwdriver to replace the cutter.
Make sure you have a cross-head screwdriver with you
before replacing the cutter.
c
Important:
Take care not to damage the cutter blade.
Dropping it or knocking it against hard objects
may chip the blade.
A
Turn off the printer.
If paper is loaded, remove it from the printer.
B
Open the cartridge covers on the left and right.
Maintenance
C
Open the printer cover.
D
Remove the front cover.
Use a cross-head screwdriver and remove the
four screws holding the front cover in place.
Remove the front cover.
126