Table of Contents
Advertisement
4(E)
About This Manual (Continued)
Procedure order number
Operation
Reference information
Supplementary information
important notes
About This Manua!
mer Playback _
Using an optional timer, you can automatically start playback at a preset time.
Timer playback
Chapter
¢
4-14(E) | captor « Piayoack
Timer playback
1 Set the POWER switch of the VCR 10 ON.
2 Set the playback start and stop times with the timer.
For details, refer to the operation manual provided with the timer.
3 Set the TIMER switch to PLAY.
The timer automatically turns on the VCR power at the playback start time.
To stop piayback during timer playback
Press the STOP button of the VCR.
© The player automatically rewinds the tape then stops. If, however, you set repeat
playback between a particular point and the tape end, the player automatically
rewinds the tape, enters repeat playback mode and starts playback repeatedly
upon reaching the tape end.
© When the playback stop time is reached, the timer tums off the player power with
the tape wound around the head drum. At the next playback start time, the timer
again automatically tums on the player power. The tape stops momentarily, then
timer playback starts.
Advertisement
Table of Contents
