Sony SVP-9020 Operating Instructions Manual page 12

Videocassette player
Table of Contents

Advertisement

| Opt
io
The following accessories can be used to enhance the player.
Model name
i
Function
TI
SVRM-100 Remote contro! unit
his unit enables remote control of the player by
connecting the unit to the REMOTE connector of the
player. But, the following buttons do not function in this
configuration.
¢ FREEZE button
® REC button
e INDEX button
© MARK button
¢ ERASE button
chapter
1 THDHITIIII
SVBK-100 33-pin interface board | This board provides a 33-pin parallel interface that
enables the player to be connected to a remote contro!
unit (RM-580/500/450CE/440 etc.) employing a 33-pin
parallel interface board. You can thus control the player
from the remote control unit. (However, the editing
function of the RM-450CE/440 does not operate.)
SVBK-120 RS-232C interface
This board provides an RS-232C serial interface that
board
allows a computer to be connected. You can thus
control the player from a computer.
4
SVBK-130 Satellite interface
This board provides a satellite interface. You can use
board (available soon)
this board to construct a satellite system.
SVBK-140 RS-422A interface
This board provides an RS-422A serial interface that
board
allows the RM-450CE editing control unit to be
connected. You can thus control the player from this
editing control unit.
SVBK-150 Digital noise
This board reduces digital chroma noise and corrects
reduction board
time base errors to increase picture sharpness, reduce
jitter, and reduce color drop out interpolation.
SVBK-160 Time code board
This board reads and generates time codes. When you
want to play back a tape onto which time codes have
been recorded, use this board with the SVBK-130 or
SVBK-140 because this board can not function without
them.
For details, refer to the operation manual supplied with
the SVBK-160 or contact your Sony dealer.
1 -6(E)
Chapter 1 SVP-9020 Introduction

Advertisement

Table of Contents
loading

Table of Contents