Memory Channels; Simplex Memory Channels - Kenwood TH-22A Instruction Manual

MEMORY CHANNELS
A total of 40 memory channels (0 to 39) are available for
storing frequencies and related data. Each memory
channel can be used either as a simplex channel or split
channel. Alternatively, a standard or non-standard
frequency offset and offset direction required for using
repeaters can be stored. Refer to "OPERATING
THROUGH REPEATERS" {page 27}.
The data listed below can be stored in each memory
channel:
Split Pp Simplex
atameler Channel Channel
YES
Shift status, REV status
DTSS code, DTS status
YES: Can be stored in memory
N/A : Not applicable
STORING DATA IN MEMORY
There are 2 methads of storing transmit/receive
frequencies and associated data in memory channels
depending on the relationship of the transmit and receive
frequencies:
« Simplex memory channels:
RX frequency = TX frequency
® Split memory channels:
RX frequency * TX frequency
m Simplex Memory Channels
1 Select the desired frequency and associated data
(Tone, CTCSS, DTSS, etc.) using the VFO,
Memory Recall or the Call channel.
2 Press [F] (1 s) to select Memory Storage.
3 Select the desired memory channel using the
ENC/SQL control.
21