Changing Call Channel Contents (Simplex); Changing Call Channel Contents (Split) - Kenwood TH-22A Instruction Manual

The contents of the Call channel cannot be deleted;
however, you can overwrite old data with new data as
described below.
gs Changing Call Channel Contents (Simplex)
1 Select the desired frequency and associated data
(Tone, CTCSS, DTSS, etc.) using the VFO or
Memory Recall.
2 Press [F] (1 $s) to select Memory Storage.
3 Press [CALL].
e The selected frequency and associated data are
stored in the Call channel, and the previous
mode is restored.
m Changing Call Channel Contents (Split)
1. After storing the receive frequency using
"Changing Call channel contents (Simplex)"
instructions in the preceding section, select the
desired transmit frequency.
2 Press [F] {1 s) to select Memory Storage.
3 Press [PTT] + [CALL].
e The selected transmit frequency is stored in the
Call channel, and the previous mode is restored.
CHANNEL DISPLAY FUNCTION
When this function is switched ON, the transceiver
selects Memory Recall and displays only a memory
channel number instead of a frequency. During
emergency drills and emergency communications, or
when participating in communications for important
events, channelized operations can increase operating
efficiency and maintain security of communications if
required.
1 Press [CALL] + POWER ON to select Menu Set-up.
2 Turn the ENC/SQL control to select Menu No. 12.
e The current Channel Display status appears.
e The default is "OFF".
3 Press [CALL] to select "OFF" or "ON".
e OFF: Turns OFF Channel Display.
e ON: Turns ON Channel Display.
4 Press any key other than [CALL], [LAMP], or [MONI]
to exit Menu Set-up.
25