D20E-K Module Front Panel; D20E-K Leds; Remote/Local Switch; D20E-K Connectors - GE Multilin D20E Installation And Maintenance Manual

TB1 connectors

D20E-K module front panel

D20E-K LEDs

Remote/local switch

D20E-K connectors

106
The TB1 terminal block connector assignments are indicated in Table 33.
Table 33: TB1 connectors
TB1 Description
1 Positive External Supply 1 (+)
2 Negative External Supply 1 (‒)
The location of the D20E-K module front panel key elements and connectors is shown in
Figure 26.
Figure 26: D20E-K module front panel elements
Remote/
LAN ports
Local
USB 2.0 TB1 Power
port input
The D20E-K module LEDs are listed in Table 34.
Table 34: D20E control output status LEDs
LED Indicator
REMOTE
LOCAL
CONTROL OUTPUT 1 to 32
The remote/local switch (S1) operation is described in section:
on page 105.
For information on Terminal Block 2 (TB2) connector assignments for the D20E-K module,
see D20E-K control outputs module
GE INFORMATION
TB1 Description
3 Positive Redundant External Supply 2 (+)
4 Negative Redundant External Supply 2 (‒)
LED Status indicators
Power System
source status
Remote/Local
switch
Color Description
Red Control outputs enabled
Blue Control outputs disabled
Red Control output selected 1 to 32 ON
on page 89.
D20E ETHERNET I/O MODULE INSTRUCTION MANUAL
CHAPTER 9: USING THE D20E MODULE
Control
output
TB2 Digital
Outputs
Module remote/local switch